Understanding Waves: Period, Frequency, and Speed of a Vibrating String

  • Thread starter Thread starter midgey
  • Start date Start date
  • Tags Tags
    Waves
AI Thread Summary
A vibrating string measuring 50.0 cm under a tension of 1.00 N is analyzed using stroboscopic images taken at 5000 flashes per minute, revealing maximum displacements at the first and fifth flashes. The period is initially estimated incorrectly, but further calculations suggest it is approximately 0.098 seconds after considering the time between flashes. The string is identified as vibrating in the second harmonic mode due to the observed pattern of maxima. To find the speed of the traveling waves, the wavelength and frequency need to be calculated based on the established period. Finally, the mass of the string can be determined using the relationship between wave speed, tension, and mass per unit length.
midgey
Messages
2
Reaction score
0
I have what I believe to be a simple question. I've looked in the book and lecture notes and couldn't find any help, so whatever you've got would be appreciated.

A vibrating string 50.0cm long is under a tension of 1.00 N. The results from five successive stroboscopic pictures are shown in Fig. 15.34. The strobe rate is set at 5000 flashes per minute and observations reveal that the maximum displacement occurred at flashes 1 and 5 with no other maxima in between.
a)Find the period, frequency, and wavelength for the traveling waves on this string.


I don't have a scanner, but fig 15.34 shows what looks like 5 simple sin graphs. They look like this order:

1)sin(x)
2).5sin(x)
3)sin(0)
4).5sin(-x)
5)sin(-x)

My guess for period looks like this:
5000/60 = 83.3 flashes/sec
5flashes/83.3 = .06 seconds = period

I'm pretty sure that's wrong, but its all I could come up with. If somebody helps me get the period, I can handle the rest.


b) In what normal mode (harmonic) is the string vibrating?

Since in fig 15.34 they only intersect at one point, it is operating in the second harmonic.

c) What is the speed of the traveling waves on the string

With wavelength and frequency, I can easily find this.

d) How fast is point P moving when the string is in: position 1 and position 3?

P is at the crest of the graph of sin(x). I'm pretty sure I just need to find the transversal velocity here, so that shouldn't be much of a problem. Set up the wave function and take the partial derivitive w.r.t. to time.

e) What is the mass of the string?

I could use a little help on this one.

Thats it. Any and all help will be appreciated.
 
Physics news on Phys.org
Actually, with a little more thought, I'm pretty sure that I need to multiply my period by 2 in order to get a full period. So my period ends up being .12 seconds. Am I right?
 
midgey said:
I don't have a scanner, but fig 15.34 shows what looks like 5 simple sin graphs. They look like this order:

1)sin(x)
2).5sin(x)
3)sin(0)
4).5sin(-x)
5)sin(-x)
I will assume you meant to write:
1)sin(x)
2).5sin(x)
3)0sin(x)
4)-.5sin(x)
5)-sin(x)

And how much of a sine wave is depicted? I assume (based on your later comments) from 0 to 2π radians?

My guess for period looks like this:
5000/60 = 83.3 flashes/sec
5flashes/83.3 = .06 seconds = period
First find the time between flashes: 60 sec/ 5000 flashes = 0.012 sec; so the time between flash 1 and flash 5 would be 4 x 0.012 = 0.048 sec. And, assuming I understand what you've been saying, that will be half the period, so period = 0.098 sec.
e) What is the mass of the string?

I could use a little help on this one.
Once you've found the speed (v) of the wave on the string, you need to relate that to the tension and mass of the string:
v = \sqrt{\frac{T}{(M/L)}}
Where T = tension, M/L = mass per unit length of string. You can solve for the mass.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top