Unusual question about magnets with same poles.

  • Thread starter Thread starter Dobbie
  • Start date Start date
  • Tags Tags
    Magnets Poles
AI Thread Summary
The discussion centers on a student's experiment to determine if an old magnet is still magnetized by using a plotting compass. It is concluded that if the magnet is still magnetized, one end should be a north pole and the other a south pole. If both ends are identified as south poles, the magnet is likely unmagnetized. The possibility of the compass being faulty is also raised, as it could affect the results. Overall, the experiment aims to clarify the magnet's current state based on compass readings.
Dobbie
Messages
3
Reaction score
0

Homework Statement



A student finds an old magnet at the back of a drawer containing other magnets.
He designs an experiment to find out if it is still magnetised.
(i) He brings a plotting compass near to end A of the old magnet, as shown in the first part of the image.
attachment.php?attachmentid=50124&d=1345717875.png

State the polarity of end Y of the old magnet.
........................[1]
(ii) The plotting compass is then brought near to end B, as shown in the second part of the image.
attachment.php?attachmentid=50124&d=1345717875.png

State the polarity of end X.
........................[1]
(iii) Suggest a possible explanation for the student’s results.
..........................
........................[1]

Homework Equations



thera no relevant equations regarding this question.

The Attempt at a Solution


my solution is that both the ends are south poles and i have no explanation what so ever...
 
Physics news on Phys.org
He designs an experiment to find out if it is still magnetised.

What if it isn't?
 
If it was magnetized that just could not happen. If unmagnetized then either N or S could be attracted to either X or Y , and it would be possible to create both those configurations if one set things up appropriately.
 
is it possible that the compass is faulty?
 
I really think the key is in the problem statement!..

He designs an experiment to find out if it is still magnetised.

As ApplePion said.. If the magnet was still magnetized one end would be south and the other North. The possible combinations were..

NN -> Not magnetised
NS -> Could be magnetised or due to chance
SN -> Could be magnetised or due to chance
SS -> Not magnetised
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top