Using a magnet near audio cable

AI Thread Summary
Using a magnet near an audio cable may cause interference, particularly due to the interaction with the speaker magnets and voice coils in headphones. The idea of replacing a 3.5mm audio jack with a magnet for a secure connection raises concerns about audio quality and potential disruption from magnetic fields. A horseshoe-shaped magnet design could mitigate interference by containing its magnetic field. Additionally, the challenge of creating reliable electrical connections with a magnetic attachment remains a key consideration. Overall, while innovative, careful testing and design are necessary to ensure audio integrity.
mbrand
Messages
2
Reaction score
0
I was wondering if there was a way of having a magnet near an audio cable without having any interferance maybe by using a sheild.

My idea was to have a magnet to replace the 3.5mm audio jack in a headphone cable and port so that it would magnetically attach.

Is this possible?
 
Engineering news on Phys.org
What makes you think a magnet will interfere?
 
I need to do some testing but I think due to the sound waves, the magnet will interrupt them when placed nearby which messes up the audio or diminishes the audio quality
 
mbrand said:
I was wondering if there was a way of having a magnet near an audio cable without having any interferance maybe by using a sheild.

My idea was to have a magnet to replace the 3.5mm audio jack in a headphone cable and port so that it would magnetically attach.

Is this possible?

mbrand said:
I need to do some testing but I think due to the sound waves, the magnet will interrupt them when placed nearby which messes up the audio or diminishes the audio quality

It's not the proximity of the magnet to the cable that could be an issue, it's the proximity of the connector magnet to the speaker magnets and voice coils in the headphones.

If you put another permanent magnet near the permanent magnet and voice coil in the speakers in the headphones, the extra magnetic field could have several bad effects on the operation of the voice coil.

But, if you are using this connector magnet to hold the cable to the headphones, you would make the magnet in a horseshoe shape (or similar), so that when it attaches to the ferrous metal piece on the headphones, its magnetic path is closed, so that none of its magnetic field leaks out to get into the voice coil assembly.

BTW, if you hold the cable on the headphones with just a magnet, how are you planning on making the electrical connections?
 
berkeman said:
BTW, if you hold the cable on the headphones with just a magnet, how are you planning on making the electrical connections?

Apple manage it very well with their recent power book / mac book (?) mains connector. A very smart design which just pulls off harmlessly when stressed too much. It would be particularly useful for a smart phone / ipod for which a normal jack is very unsuitable and vulnerable (for a clumsy sod like me, anyway).
 
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Back
Top