Verify Solutions for Dynamics Problems Homework

  • Thread starter Thread starter doug1
  • Start date Start date
  • Tags Tags
    Dynamics Urgent
AI Thread Summary
The homework problem involves calculating the maximum speed achievable while driving a car and trailer up a 12-degree incline, considering the forces acting on the system. The maximum force the trailer hitch can withstand is 4.3 x 10^3 N, with the car and trailer masses being 1.1 x 10^3 kg and 2.7 x 10^2 kg, respectively. One participant calculated an acceleration of 14.5 m/s^2 and a top speed of 36 m/s, while another pointed out a potential oversight regarding the gravitational force component acting parallel to the slope, resulting in a different speed calculation of 12.45 m/s. The discussion emphasizes the importance of including all forces, such as normal and frictional forces, in the calculations. Accurate verification of these values is crucial for solving the problem correctly.
doug1
Messages
9
Reaction score
0

Homework Statement



You are driving home from the cottage and pulling a trailer behind your car. There is a steep hill with a 12 degree incline that you must drive up. You read the instructions for the trailer hitch which keeps the trailer attached to your car. The hitch can withstand a maximum force of 4.3 x 10^3 N. The car has a mass of 1.1 x 10^3 kg. The trailer has a total mass (including the stuff inside) of 2.7 x 10^2 kg. There is rolling friction between the trailer and road with μr = 0.15 (treat this just like kinetic friction). You start from the bottom of the hill at rest (a stop sign). What is the top speed you could achieve after driving 45.0 m up the hill?


The Attempt at a Solution



I drew a FBD of the trailer and then made the assumption that the maximum Ft (force of tension) pulling the trailer is 4.3 x 10^3 N. I then isolated variable 'a', and ascertained an acceleration of 14.5 m/s^2.

I then determined the maximum velocity to be 36 m/s. Can anyone verify this value?
 
Physics news on Phys.org
Your procedure seems right. Hopefully you included all other forces such as the Normal and the Friction into your calculation.
 
doug1 said:
ascertained an acceleration of 14.5 m/s^2.
I only get 12.45. Did you perhaps omit the component of gravity parallel to the slope?
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top