Understanding the Physics Behind a Vertical String's Wave Pulse Travel Time?

  • Thread starter Thread starter skiboka33
  • Start date Start date
  • Tags Tags
    String Vertical
AI Thread Summary
A vertical rope of mass m and length L is analyzed for the travel time of a transverse wave pulse. The initial approach to find the wave speed using the tension and mass per unit length is noted, but the calculation of time requires integration due to the variable speed along the rope. The correct expression for wave speed is derived as a function of distance from the bottom, leading to the need for integration to determine the total travel time. The integration ultimately shows that the time taken for the wave pulse to travel the length of the rope is t = 2(L/g)^(1/2). Clarification is sought on the tension formula used in the calculations.
skiboka33
Messages
59
Reaction score
0
A rope of mass m and length L is suspended vertically. Show that a transverse wave pulse will travel the length of the tope in a time t = 2(L/g)^1/2.

stuck... i tried:

v = (T/u)^1/2 ; where T = m(X/L)g and u = m/L

the X is the distance from the bottom of the string...

so i got v= (xg)^1/2

t= (L-X)/ (xg)^1/2

which i can't simplify to t = 2(L/g)^1/2.

Where did I go wrong here? logic is making sense to me but I am no getting the answer. thanks.
 
Physics news on Phys.org
You found v as of function of x correctly, but then just multiplied by the distance to find the time. Since v is not constant, you must integrate:
v = \frac{dx}{dt} = (xg)^{1/2}
t = \int_{0}^{L}\frac{dx}{(xg)^{1/2}}
 
can you please expain why T = m(X/L)g? Thanks!
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Correct statement about a reservoir with an outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top