What Are the Topics Covered in CIVE1400: Fluid Mechanics?

AI Thread Summary
CIVE1400: Fluid Mechanics covers a comprehensive range of topics essential for understanding fluid behavior and dynamics. Key areas include the fundamentals of fluid as a continuum, classical mechanics applied to fluids, and the Navier-Stokes equations. The course also explores boundary layer theory, turbulence, and heat and mass transfer in fluid systems. Additional discussions focus on low and high Reynolds number flows, potential flow, and two-phase flow dynamics. This syllabus provides a solid foundation for students in civil engineering and related fields.
Astronuc
Staff Emeritus
Science Advisor
Gold Member
Messages
22,340
Reaction score
7,138
http://www.see.ed.ac.uk/~johnc/teaching/fluidmechanics4/2003-04/fluids3/syllabus.html#syl3

Nice set - but parts seem to be missing

Introduction. Experimental observations. definitions: fluid as a continuum, streamlines, streamtubes, particle paths, streaklines, circulation, vorticity. Frames of reference and co-ordinate systems - Tritton 1,2,3,5 &6, Rouse 2, WWW 1,3,12
Link to lecture 1

Classical mechanics applied to fluids. Continuity, Incompressibility, Vector notation, Material derivative operator, acceleration vector, (rate of strain tensor, stress tensor, isotropic and deviatoric stresses) - Tritton 5, 6, Bird 3, Kay 12, WWW 4,5,7, Schlichting 3,4,5 (references also apply to next lectures)
Link to lecture 2

Navier Stokes equations, Boundary conditions; importance of Reynolds number - Tritton 7, Schlichting 4, WWW 7,9,11
Link to lecture 3

Low Re flows; Creeping flow approximation; Poiseuille and Couette flows and Stokes flow past a sphere - Tritton 8,9, Schlichting 1,5,6, WWW 12
Link to lecture 4

High Re flows; difficulties in simplifying Navier Stokes equations Euler's Equation - Tritton 8, Bird 4, WWW 9
Link to lecture 5

Potential flow: Velocity Potential and Stream functions, Cauchy-Riemann analysis, flow nets for steady 2D irrotational flow, lift, Kutta-Joukowski theorem, d'Alembert's paradox - Tritton 13, Rouse 28,40-44, Prandtl 2, WWW 10
Link to lecture 6

Boundary Layer Approximation; simplification of Navier Stokes Equation, Laminar and Turbulent Boundary Layers, exact (Blasius) treatment of laminar layer. Von Karman Momentum Integral Analysis, Boundary Layers over curved surfaces, Separation and reattachment; causes, control & effect on bulk flow - Tritton 11,12 Schlichting 2,7,8,9,14, Kay 13, WWW 12
Link to lecture 7

Heat and Mass Transfer through Boundary Layers, relations between heat, mass and momentum transfer across flow boundaries - Tritton 14, Schlichting 12, Bird 10,18, WWW 16,19,20,25,28,30
Link to lecture 8

Turbulence; phenomena, experiments, descriptions & theories, homogeneous isotropic turbulence, turbulent pipe flow, turbulence and mixing, Dimensional Analysis, Experimentation - Tritton 19,20,21,25, Schlichting 18-22,24, Bird 5,12,20, WWW 11,13,14, Harnby

Two phase flow; liquid-gas flow regimes in vertical and horizontal pipes, pressure drops - Holland 7
Link to lecture 10

References

Tritton D.J. "Physical Fluid Dynamics" Clarendon Press, Oxford. 2nd ed 1988
Welty, Wicks & Wilson "Fundamentals of Momentum, Heat and Mass transfer" Wiley 1984
Holland F.A. and Bragg R. "Fluid Flow for Chemical Engineers" Edward Arnold 2nd ed 1995
Bird, Stewart and Lightfoot "Transport Phenomena" Wiley 1960
Rouse H. "Advanced Mechanics of Fluids" Wiley 1959
Kay J.M. and Nedderman R.M. "Fluid Mechanics and Transfer Processes" C.U.P. 1985
Prandtl L. "Essentials of Fluid Dynamics" Blackie & Son 1952
Schlichting H. "Boundary Layer Theory" McGraw Hill 6th ed 1968
Harnby, Edwards and Nienow "Mixing in the Process Industries" Butterworths 1991
 
Last edited by a moderator:
Engineering news on Phys.org
School-wide Program on Fluid Mechanics
Modules on High Reynolds Number Flows
K. P. Burr, T. R. Akylas & C. C. Mei

CHAPTER ONE
RAYLEIGH PROBLEM - DIFFUSION OF VORTICITY DUE TO NO SLIP AT BOUNDARY
http://web.mit.edu/fluids-modules/www/highspeed_flows/ver2/bl_Chap1/node1.html

CHAPTER TWO
TWO-DIMENSIONAL LAMINAR BOUNDARY LAYERS
http://web.mit.edu/fluids-modules/www/highspeed_flows/ver2/bl_Chap2/bl_Chap2_h.html

High Speed Flows
http://web.mit.edu/fluids-modules/www/highspeed_flows/


Fluid Mechanics
http://web.mit.edu/fluids-modules/www/
 
Last edited by a moderator:
CIVE1400: Fluid Mechanics

http://www.efm.leeds.ac.uk/CIVE/CIVE1400/

Dr Andrew Sleigh & Dr Cath Noakes
Civil Engineering
University of Leeds

Introduction
Fluids and Their Properties
Statics
Dynamics
Real Fluids
Dimensional analysis
Worked examples
Some pictures
Past Examination Solutions
 
Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
Thread 'What's the most likely cause for this carbon seal crack?'
We have a molded carbon graphite seal that is used in an inline axial piston, variable displacement hydraulic pump. One of our customers reported that, when using the “A” parts in the past, they only needed to replace them due to normal wear. However, after switching to our parts, the replacement cycle seems to be much shorter due to “broken” or “cracked” failures. This issue was identified after hydraulic fluid leakage was observed. According to their records, the same problem has occurred...
Back
Top