I What causes disturbance on my phone camera?

AI Thread Summary
The discussion centers on the appearance of static-like noise on a low-quality smartphone camera when capturing images, particularly in low-light conditions. Participants agree that this noise is likely due to the camera sensor's limitations, which can amplify random deviations in pixel values, resulting in grainy images. The issue is exacerbated in low light, where the signal-to-noise ratio is lower, making imperfections more visible. Higher-end smartphone cameras tend to perform better due to superior sensors and lenses that gather more light. Overall, the problem is attributed to the inherent characteristics of inexpensive camera technology rather than external factors like dust or subatomic particles.
Calconceptofnumber1
Messages
11
Reaction score
1
Hi I have a cheap smart phone with a low quality camera when I go to take a picture there is what I would describe as like old television static appearing in front of the image as it appears on the phone screen (although what is beyond it can still be seen). I am wondering if this is just dust particles? or is it disruption in the light caused by subatomic waves/particles?

Cal
 
Physics news on Phys.org
Calconceptofnumber1 said:
Hi I have a cheap smart phone with a low quality camera when I go to take a picture there is what I would describe as like old television static appearing in front of the image as it appears on the phone screen (although what is beyond it can still be seen). I am wondering if this is just dust particles? or is it disruption in the light caused by subatomic waves/particles?

Cal
Welcome to the PF.

Can you use the Upload button at the lower right to Upload JPEG images of a couple of your pictures showing this?
 
It can be seen on the walls in this picture, in particularly the part in the bottom left. But before the picture is taken then it appears to be moving all over the image at high speed.
 

Attachments

  • IMG_20171215_161837[1].jpg
    IMG_20171215_161837[1].jpg
    35.5 KB · Views: 616
Can you take a few pictures in a row of a blank wall and post them?
 
Here you go :smile:.
 

Attachments

  • IMG_20171215_220757[1].jpg
    IMG_20171215_220757[1].jpg
    39.2 KB · Views: 537
  • IMG_20171215_220757_1[1].jpg
    IMG_20171215_220757_1[1].jpg
    38.9 KB · Views: 571
  • IMG_20171215_220758[1].jpg
    IMG_20171215_220758[1].jpg
    38.8 KB · Views: 533
  • IMG_20171215_220800[1].jpg
    IMG_20171215_220800[1].jpg
    39.3 KB · Views: 531
Looks like simple noise in the camera. The conversion between the amount of light hitting a sensor and getting a digital value of that is not perfect, and you get random deviations for each pixel each time you take an image.
 
I agree, it looks like it is just noise. Noise becomes more visible in darker regions because there is less signal to obscure it and because the gain is higher.
 
Calconceptofnumber1 said:
It can be seen on the walls in this picture, in particularly the part in the bottom left. But before the picture is taken then it appears to be moving all over the image at high speed.
That just looks like a grainy low-light photo. It happens when the camera uses software to amplify the signal, increasing the noise. Does that happen when there is more light?
 
Calconceptofnumber1 said:
Hi I have a cheap smart phone with a low quality camera
My cheap smartphone with a decent camera did the same thing yesterday in low light. Normally the thing takes excellent pictures but the low light makes it grainy.
WP_20171213_17_28_05_Pro[1].jpg
 

Attachments

  • WP_20171213_17_28_05_Pro[1].jpg
    WP_20171213_17_28_05_Pro[1].jpg
    50.6 KB · Views: 582
  • #10
mfb said:
Looks like simple noise in the camera.

totally agree ...

noise due to the lack of light to produce a decent image
 
  • Like
Likes sophiecentaur and CWatters
  • #11
All sensors, including optical, sound and radio frequency detectors, are subject to random fluctuation. It can either be due to random thermal movement of air molecules or to the effects of temperature on the random way electrons move through conductors and semiconductors. The level of that 'Noise' depends on the temperature. It is the Signal to Noise ratio that determines how good the final image or played back sound is.
The sensors in modern top end camera phones are extremely good and also the lenses are probably bigger, to gather more light so many of the pictures that, for instance, my iPhone produces look extremely good. However, if you try to display the image on a full monitor screen, then the imperfections (including the noise) start to show. There's always a better one available the following year - if you happen to have hundreds of pounds every year! It's questionable whetnher it's worth while though. :smile:
 
  • Like
Likes davenn and jerromyjon

Similar threads

Back
Top