What Force Must Be Exerted at 35 Degrees on a 30 Degree Hill?

  • Thread starter Thread starter Hitokiri
  • Start date Start date
  • Tags Tags
    Newton
AI Thread Summary
To determine the force exerted by a boy dragging a 100-N sled up a 20-degree slope at constant velocity, it is crucial to analyze the forces involved. The angle of 35 degrees mentioned refers to the angle of force application relative to the slope, meaning it is actually 55 degrees from the horizontal. Understanding this distinction helps in breaking down the forces into components parallel and perpendicular to the slope. The coefficient of friction is also a key factor in calculating the required force. Properly resolving these forces will lead to the solution of the problem.
Hitokiri
Messages
4
Reaction score
0
"Respect" Newton question

Ok here's the question:

A boy drags a 100-N sled up a 20 degree slope at constant velocity. If the coefficient of friction between sled and hill is 0.2, what force must he exert at an angle of 35 degree with respect to the hill?


Ok, I've done the FBD and summed up the forces of the 20 degree. The part where i have the most trouble is understanding what they mean by "respect to the 30 degree hill". Does this mean i carry the friction, tension, or what?

Thanks
 
Physics news on Phys.org
There is no 30 degree hill!

The wording is "what force must he exert at an angle of 35 degree with respect to the hill?". The "with respect to" here just means that the 35 degrees is measured from the hill, not the horizontal. Since the hill is 20 degrees from the horizontal, that means the force is actually being applied 55 degrees from the horizontal.

I recommend you divide all forces into components parallel to and perpendicular to the hill.
 
ooo ok i see how you do it, thanks
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top