What is exactly is a non-conducting material ?

  • Thread starter Thread starter flyingpig
  • Start date Start date
  • Tags Tags
    Material
AI Thread Summary
A non-conducting material, also known as an insulator, does not allow the flow of electric current due to the absence of free electrons in the conduction band. In Gauss's law problems, it is important to distinguish between non-conductors and semiconductors, as the latter can conduct electricity when doped. Non-conducting materials have charges that are immobile, while wires in circuits are classified as conductors. The application of Gauss's law to semiconductors can vary based on the specific scenario, particularly in static versus dynamic conditions. Generally, unless explicitly stated, problems can be assumed to involve non-conducting materials rather than semiconductors.
flyingpig
Messages
2,574
Reaction score
1
What is exactly is a "non-conducting material"?

Homework Statement



In many Gauss's law problems, we are often presented with "consider a nonconducting sphere with radius..."

I realize most of the time we aer suppose to assume it is an inductor, how are we to know it is NOT an semi-conductor?

How does Gauss's Law apply to a semi-conductor? Are wires in circuits semi-conductors?
 
Physics news on Phys.org


A non-conducting material is an insulator (not an 'inductor'), in which the charges are frozen in-place (i.e. immobile).

You know its not a semiconductor, because it says its an insulator.

Application of gauss' law to a semi-conductor would be basically the same, but it would depend somewhat on the particular situation, and whether or not its a statics problem (vs. dynamics).

Wires in circuits are conductors.
 


A non-conducting material is one that does not have electrons in the conduction band ("free" electrons) and therefore does not readily carry a current. Another word for these materials is "insulator". Semi-conducting materials are essentially non-conducting unless doped or acted on in a way specifically intended to make them conducting. I would think that unless the problem specifically mentions doped semiconductors, you can safely assume they are not involved. Wires in circuits are regular conductors. It is the solid state transistors, diodes, etc. that are made out of semiconducting materials, but they are special cases that are coaxed to be conducting through doping.
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top