What is the acceleration of an object with given forces and weight?

  • Thread starter Thread starter Smile101
  • Start date Start date
AI Thread Summary
To determine the acceleration of an object with a weight of 20 N and an applied force of 15 N, while accounting for a friction force of 5 N, the net force must be calculated. The correct approach is to subtract the friction from the applied force, resulting in a net force of 10 N. Using the equation F = ma, the mass is derived from the weight (20 N), which equals approximately 2 kg. This leads to the calculation of acceleration as 5 m/s². The final answer aligns with the textbook solution, confirming the correct understanding of the forces involved.
Smile101
Messages
29
Reaction score
0
Hey guys, I reallly don't understand how to do this question. i'd really appreciate it if you can help me..thanks :)

Homework Statement


A person applies a force of 15 N [E] on an object of weight 20 N. If the force of friction has a magnitude of 5.0 N, what is the acceleration of the object?
a) 7.5 m/s^2 [E]
b) 0.13 m/s^2 [E]
c) 0.50 m/s^2 [E]
d) 5.0 m/s^2 [E]
e) 10 m/s^2 [E]

Homework Equations


f=ma
fnet=fapp+Ff


The Attempt at a Solution



Weight= 20 N = F = Fg
Fapp= 15 N
Ff=5 N

Fnet= 15+5 = 20 N
I don't know what to do next ..thanks
 
Physics news on Phys.org


Friction opposes motion. So should you be adding the 5 N to 15 N? Or substracting?

Once you have the correct Fnet, then use Fnet = m * a. You get "m" from the weight.
 


Chrisas said:
Friction opposes motion. So should you be adding the 5 N to 15 N? Or substracting?

Once you have the correct Fnet, then use Fnet = m * a. You get "m" from the weight.


Yea i just realized that thanks..so it would be 15+(-5) = 10 N

But weight isn't only the mass, from what i know weight is equivalent to net force that's why it's measured in Newtons..that's where I'm getting confused!

oh btw the answer at the back of the textbook says d) 5m/s^2
 


Ohhhhhh nvm! i just realized what you meant!

20/9.8= 2.0kg

f=ma
10=2a
therefore a= 5m/s^2

Thanks :D
 


Smile101 said:
Yea i just realized that thanks..so it would be 15+(-5) = 10 N

But weight isn't only the mass, from what i know weight is equivalent to net force that's why it's measured in Newtons..that's where I'm getting confused!

oh btw the answer at the back of the textbook says d) 5m/s^2

I agree with that answer. I'm assuming the applied force and friction is horizontal and that the block is moving horizontally. That means that the vertical forces are not affected by the horizontal forces. How is weight force defined? Like any other force it is F = mass * accel. However, the accel in this equation is not an acceleration due to motion but due to gravity. You should know what the acceleration of gravity is and you know what the force is. Solve for mass.

Edit: Yep you got it before I finished writing. Good Job!
 
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Back
Top