What is the Coordinate of Point B in a Sinusoidal Wave?

  • Thread starter Thread starter jpond89
  • Start date Start date
  • Tags Tags
    Sinusoidal Wave
AI Thread Summary
To find the coordinate of point B in the sinusoidal wave, it is essential to determine the phase difference of 60.0° at a constant time. The wave function is given as y = (15.0 cm) cos(0.157x - 50.3t), where the phase at point A (the origin) is zero. The phase difference of 60° corresponds to a shift of π/3 radians, leading to the equation 0.157x = π/3. Solving for x gives the coordinate of point B as approximately 6.37 cm. This calculation confirms the relationship between phase and position in sinusoidal waves.
jpond89
Messages
3
Reaction score
0

Homework Statement



Consider the sinusoidal wave in the figure, with the wave function below.

At a certain instant, let point A be at the origin and point B be the first point along the x-axis where the wave is 60.0° out of phase with point A. What is the coordinate of point B?

y = (15.0 cm) cos(0.157x - 50.3t)

and I am not allowed to post the image but here's some helpful information:
its a cosine graph, and \lambda = 40 cm, T = 0.125 s, f = 8.00 hz, k = 0.157 rads/cm

Homework Equations



Some equations that I have are:
k=2\pi/\lambda
v=\lambda*f
y=Asin(kx-\omegat)

The Attempt at a Solution


What I have tried so far is:
y=15*sin((.157)x-(50.3)t + \pi/3)
The example says " The vertical position of an element of the medium at t = 0 and x = 0 is also 15.0 cm "
The only problem is that I am really stuck and I cannot seem what to set the 60.0\circ equal to. Help would be much appreciated! Thank you!
 
Physics news on Phys.org
Everything in the argument of the cosine is the phase of the wave. So the phase is a function of both x and t. However, we're looking at this wave at a particular "instant", which means that t is constant. So, the only thing that would cause a phase change is x. So how far from the origin would the x coordinate of point B have to be in order for 0.157x - 50.3t to differ from 0.157*(0) - 50.3t by 60 degrees, given that t is constant?
 
Would x = 6.37 * \pi because that would make it (\pi/3 -50.3t)
 
I think you might be off by a factor of 3. Check your work again.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Back
Top