What is the electric field at a point midway between two charges?

AI Thread Summary
To find the electric field at a point midway between two charges of +3.0 x 10^-9 C and +60 x 10^-9 C separated by 30 cm, Coulomb's Law is applied, specifically focusing on the electric field rather than force. The electric field from each charge must be calculated at a distance of 15 cm from the midpoint, and since both charges are positive, their fields will point away from each charge. The formula used is E = k*q/r^2, where k is the constant (9 x 10^9), q is the charge, and r is the distance. The individual electric fields from each charge are then combined vectorially to determine the total electric field at the midpoint. Understanding vector addition is crucial for accurately solving similar problems.
daniel69
Messages
10
Reaction score
0
Find the electric field at a point midway between two charges of + 3.0 x 10^-9 C and + 60 x 10^-9 C separated by a distance of 30 cm.


would we utilize coulums law:

[9 x 10^9 * 3.0 x 10^-9 * 60 x 10^-9] / [30/2]
 
Physics news on Phys.org
daniel69 said:
Find the electric field at a point midway between two charges of + 3.0 x 10^-9 C and + 60 x 10^-9 C separated by a distance of 30 cm.


would we utilize coulums law:

Yes, but this isn't it:
[9 x 10^9 * 3.0 x 10^-9 * 60 x 10^-9] / [30/2]

What is the expression for Coulomb's Law and what do the symbols mean? You need to find the electric field from each of the two charges at a point 15 cm. away from each of them. Keep in mind that electric fields require vectors: which way does the electric field from each charge point at the place midway between the two charges?
 
F = k*q1*q2 / r^2

k = contant of 9 x 10^9
q's = the charges
r = the radius or distance

did i forget to square it. is that what i did wrong.
 
daniel69 said:
F = k*q1*q2 / r^2

k = contant of 9 x 10^9
q's = the charges
r = the radius or distance

did i forget to square it. is that what i did wrong.

All right -- that's the force equation. The problem is asking for the electric field at a point, so we drop the q2.

Make a picture of the situation. We have a line segment 0.3 meters long (you'll want to work in meters) with a charge on each end. (Are those supposed to be + 3.0 x 10^-9 C and + 6.0 x 10^-9 C ? 60·10^-9 seems rather large compared to the other charge...) Both charges are positive, so which way does the field from each charge point at the position halfway between them? That will tell you whether you want to add or subtract the individual fields.

Now use the formula for the electric field for each charge at the appropriate distance. (How far is the midpoint from each charge?) You then combine the fields appropriately (have you worked with vectors?) to get the total at that midpoint.
 
Believe it or not, it should read 60. I had to recheck that myself.

So dropping the q2 should give us:
[k*q1] / r^2

Since both charges are negative, I would guess that they would repel one another and face in opposite directions outward.

I don't know whether to add or subtract the individual fields though.

And half way inbetween would be 30/2 = 15?

I haven't really worked that much with vectors. I know the rules but haven't had much work with application of vectors.

Please help so I can apply this to similar problems.

Thanks
 
Last edited:
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top