What is the equivalent capacitance between points A & B?

AI Thread Summary
The discussion focuses on calculating the equivalent capacitance between points A and B in a circuit with capacitors. Initially, it is proposed that the capacitors are in parallel, leading to an equivalent capacitance of 2C. However, further analysis reveals that the capacitors are actually in series due to a zero potential difference across certain points, resulting in an equivalent capacitance of C/2. The conversation emphasizes understanding the circuit's configuration and the implications of steady-state conditions on current flow. Ultimately, the correct interpretation of the circuit leads to the conclusion that the capacitors on the left are in series.
Kronos
Messages
3
Reaction score
0

Homework Statement


Find the equivalent capacitance between points A & B

1.png

Homework Equations



Ceq1 = C + C
1/Ceq2 = 1/2C + 1/2C + ...

The Attempt at a Solution


[/B]
It is my understanding that each capacitor top and bottom are connected in parallel, so their equivalent is 2C.

2.png

Now, they are all connected in series, so their equivalent would be:
1/Ceq2 = 1/2C + 1/2C + 1/2C + 1/2C

Thus,
Ceq2 = C/2

Is my reasoning acceptable?
Thank you.
 
Physics news on Phys.org
Kronos said:
each capacitor top and bottom are connected in parallel
If the effective capacitance sought were between the left hand side and the right hand side, that would work. But it isn't.

Is there more context here, like an applied varying potential?
If not, think about potentials. What might the potential difference be between the right hand side of the top left capacitor and the right hand side of the bottom left capacitor?
 
The potential difference would just be zero since the capacitors are at steady state. Thus, there is no current flowing through the wire w/ resistor, and by Ohm's law:
V = I*R
V = (0) * R
V = 0
 
Kronos said:
The potential difference would just be zero since the capacitors are at steady state. Thus, there is no current flowing through the wire w/ resistor, and by Ohm's law:
V = I*R
V = (0) * R
V = 0
Right. Does that help you simplify the circuit?
 
haruspex said:
Right. Does that help you simplify the circuit?
Yes. That means that the capacitor on the top left and the capacitor on the bottom left are connected in series, correct? Since the same charge will flow through them.
 
Kronos said:
Yes. That means that the capacitor on the top left and the capacitor on the bottom left are connected in series, correct? Since the same charge will flow through them.
That's how I read it.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top