What is the mass of the meter stick?

  • Thread starter Thread starter Quipzley
  • Start date Start date
  • Tags Tags
    Mass Meter
AI Thread Summary
The meter stick balances at the 50.0 cm mark with two 5.00 g coins stacked at the 12.0 cm mark, shifting the balance to 45.5 cm. The discussion focuses on calculating the mass of the meter stick using torque principles, where equal torques on both sides must be established. The torque created by the weight of the coins and the stick's center of mass is analyzed to find the mass. The calculated torque from the coins is balanced by the torque from the meter stick's mass. Ultimately, the mass of the meter stick is determined to be 74.4 g.
Quipzley
Messages
8
Reaction score
0
A meter stick blances horizontally on a knife-edge at the 50.0 cm mark. With two 5.00 g coins stacked over the 12.0 cm mark, the stick is found to balance at the 45.5 cm mark. What is the mass of the meter stick?

I know it is going to be having equal torques. The torque on one side should be .01 kg*9.8 m/s^2* .335 m = .03283 N*m + the torque of the .335 m of meter stick. The other side is just the torque of the .455 m of stick. I'm not sure how to calculate the torque of the meter stick.
 
Physics news on Phys.org
The answer is supposed to be 74.4 g.
 
Pick a point, any point, and sum moments to zero. Define your variables; mass of stick and coins, ms and mc; forces, a, b, and g. Solve for ms.
 
Quipzley said:
A meter stick blances horizontally on a knife-edge at the 50.0 cm mark. With two 5.00 g coins stacked over the 12.0 cm mark, the stick is found to balance at the 45.5 cm mark. What is the mass of the meter stick?

I know it is going to be having equal torques. The torque on one side should be .01 kg*9.8 m/s^2* .335 m = .03283 N*m + the torque of the .335 m of meter stick. The other side is just the torque of the .455 m of stick. I'm not sure how to calculate the torque of the meter stick.

The stick's centre of mass experiences a weight force mg, (50.0 - 45.5) cm from the knife-edge, producing a torque of mg(0.045 m). This torque is balanced by the torque of the coins (0.01000 kg)g(0.335 m) = mg(0.045 m). Therefore m = 74.4 g.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top