What is the maximum speed and spring constant of a weight on a massless spring?

AI Thread Summary
The discussion revolves around calculating the maximum speed and spring constant of a weight on a massless spring, given its motion equation. The weight is 4.50 kg and follows the motion described by y(t)=(8.50 cm)sin[(3.85 rad/s)t-1.40]. The angular frequency, omega, is used to derive the spring constant (k) using the formula k=omega^2*m, resulting in k=66.7 N/m. The maximum speed (vmax) is calculated using the relationship vmax=sqrt((k*y0^2)/m), yielding a maximum speed of 3.27 m/s. The calculations and units are confirmed to be correct, clarifying the conversion of k's units to N/m.
wondermoose
Messages
18
Reaction score
0

Homework Statement


A 4.50 kg weight hangs from a vertical massless ideal spring. When set in vertical motion, the weight obeys the equation y(t)=(8.50 cm)sin[(3.85 rad/s)t-1.40]. What is the maximum speed of the weight? What is the spring constant?


Homework Equations


Hooke's law: F = -kx
W(spring): 1/2kx(initial)^2 - 1/2kx(final)^2
W(applied): -W(spring) if stationary before/after displacement



The Attempt at a Solution


Throwing in the equation that the weight obeys has completely thrown me off. I'm not even sure what that means and how I apply it to the problem. I don't have much to show for it because I'm not sure where to begin, and I can't seem to find a similar problem to help find a starting point. Thanks!
 
Physics news on Phys.org
harmonic oscillations are described with this equation: y=y0*sin(omega*t+phi0).
In this case, omega=sqrt(k/m), on the other side, omega = 3.85 rad/s. So you can find k.

as the energy of the system is constant:
k*(y0)^2=m(vmax)^2.
From this equation you can find the maximum velocity.
 
Okay, here's what I've got.

omega = sqrt(k/m)

k = omega2*m

k=(3.85 rad/s)2(4.5 kg)
k=66.7 (units?)

Then, k(y0)2 = m(vmax)2

vmax = sqrt((k*y02)/m)

vmax = 3.27 m/s

Look okay? I'm not sure how rad2*kg/sec2 converts to anything though, in finding the spring constant.
 
Yes, it looks fine) about the units of k:
kg/sec^2=(kg*m)/(m*sec^2)=N/m
(N=kg*m/sec^2)
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top