What is the PSI needed to lift me at an acceleration of 1m/s/s?

  • Thread starter Thread starter daviddjh
  • Start date Start date
  • Tags Tags
    Lift Psi
AI Thread Summary
To determine the psi needed for lifting with an acceleration of 1m/s², the user applied the formula F=ma, incorporating gravitational acceleration to achieve a total of 10.8m/s². After calculating the force required, they found it to be 685.8 N, which converts to 154.17 lbs. With a force area of 1.953 in², the resulting psi was calculated as 78.9 psi. The user seeks confirmation of their calculations and guidance on the practical application of this information. The discussion emphasizes the importance of accurate calculations and potential real-world applications.
daviddjh
Messages
3
Reaction score
0
I am trying to find the psi needed to lift me off the ground at an acceleration of 1m/s/s so i started with the equation f=ma. For acceleration I added f=m(1m/s/s) but i need to cancel gravity out, so I took 9.8m/s/s + 1m/s/s = 10.8m/s/s. I thought it would work because 1m/s/s was the acceleration I wanted to go. For mass I added my mass in kg. I finally had F=63.5(10.8). I found 685.8n was the force needed. I converted 685.8n to 154.17flb. The area I need the force to be on is 1.953in2. To find the psi, I did 154.17 / 1.953 = 78.9 psi. I am not sure this is right. I am a thirteen year old boy in 7th grade. Any guidance would be wonderful.
 
Physics news on Phys.org
The concept is right, and the numbers can be checked by a computer.
 
Psi of what though? Is there a real-world project you are hoping to do?
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top