What is the reaction at the anode in this electrolysis experiment?

  • Thread starter Thread starter Brimley
  • Start date Start date
  • Tags Tags
    Electrochemistry
AI Thread Summary
In the electrolysis of an aqueous CuSO4 solution, the cathode reaction results in the deposition of copper, indicating that copper ions are reduced. The anode reaction, which involves oxidation, typically produces a gaseous product, likely oxygen, due to the electrolysis of water. The discussion highlights the importance of understanding redox reactions and half-reactions to determine the products at both electrodes. While hydrogen gas could theoretically evolve, the presence of copper being reduced makes it unlikely for hydrogen to be produced simultaneously. Overall, the key takeaway is that the gaseous product at the anode in this scenario is primarily oxygen.
Brimley
Messages
76
Reaction score
0
Hello everyone, I've been reading up on electrochemistry and trying to make the connection from chemistry theory to what I learned during my time as an undergrad and grad student in electrical engineering and I'm having trouble bridging the gap. I have selected one example from my reference text that I'm hoping someone can better help me explain.

An aqueous solution of CuSO4 was electrolyzed between inert electrodes for 30 minutes. The only cathode reaction was the deposition of 0.231 g of Cu.
Okay, just interpreting that part, I believe that since the cathode reaction only involved Cu, that the SO42- ion wasn't affected by the electrolysis.

The book then says that the "reaction of the anode" can then be determined, and at the anode, a gaseous product evolves.

1. Can anyone describe what they mean by the reaction at the anode can be determined? What is it? How does one find it?

2. For the gaseous product that evolves at the anode, can we calculate it?
2.a - If so, can we calculate it in terms of its mass, volume, and chemical moles?

Thank you! I really appreciate any and all help! - Brim
 
Chemistry news on Phys.org
For the current to flow charge has to cross the phase boundary between electrode and the solution twice - one on the anode, once on the cathode. Charge is conserved, so in both cases exactly the same charge (number of electrons) flows through the phase boundary. For the electrons to cross the phase boundary there must occur some reaction - in your case on the cathode copper is reduced, so something be oxidized on the anode. If it is a gas, and you were electrolyzing copper sulfate dissolved in water, what gas can it be?
 
Hello Borek, so the aqueous word is really important then when it says an aqueous solution of CuSO4 !

Okay, so I want to understand what you're saying a little bit better. So essentially if I take a bin, fill it with this solution and, but two electrodes in it connected to the same source (assuming one positive terminal, one negative), that is what completes the circuit path. The electrons from from the anode of one electrode through the solution and then to the cathode of the other electrode. By the time the current recirculates to the cathode, 0.231 g of Cu has been deposited (meaning reduced so that means it becomes more negative right?).

(Hopefully my above paragraph is right, I'm just trying to think this out loud via the internet so people can catch me if I'm thinking about it the wrong way).

I now see why you came to the conclusion of it being a gas because it says a gaseous product. I now know I have to pay more attention to the words gaseous and aqueous! I think it could be multiple gases though, couldn't it? So we have H2O from the water and we have O4 from the Sulfate ion, and I thought Hydrogren (H) still counts as a gas even though its listed on the metals side of the periodic table.

How can you tell which one is given off? I assume Oxygen but I'd like to know why that is so.

Before I did any deeper, can you tell me if what I've said so far is right or make corrections? Thank you!
 
What you wrote is a little bit chaotic to me, but at least at first sight nothing cries out loud "I am wrong!"

Do you know what are products of electrolysis of water (just water)?
 
Borek said:
What you wrote is a little bit chaotic to me, but at least at first sight nothing cries out loud "I am wrong!"

Do you know what are products of electrolysis of water (just water)?

Hello Borek! I really do not understand how the electrolysis of water works quite yet.

I did some reading about it on Wikipedia: http://en.wikipedia.org/wiki/Electrolysis_of_water

Electrolysis of water is the decomposition of water (H2O) into oxygen (O2) and hydrogen gas (H2) due to an electric current being passed through the water.

In my opinion, I think that confirms what I said in my past post that it could be multiple gases and I'm not sure which one to choose!

It also shows this:

Overall reaction: 2 H2O(l) → 2 H2(g) + O2(g)

I do not understand how this works and when I tried to follow the wiki explanation, it was a little over my head.

I really appreciate your help! :-)
 
Without understanding redox reactions taking place (and without understanding half reactions) you won't be able to move much further. However, as you already wrote, you expected hydrogen to behave similarly to metals. Trick is, there is already a metal reacting (being reduced) on the cathode - so it is rather unlikely that hydrogen will evolve at the same time. What does it left you with?
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I was introduced to the Octet Rule recently and make me wonder, why does 8 valence electrons or a full p orbital always make an element inert? What is so special with a full p orbital? Like take Calcium for an example, its outer orbital is filled but its only the s orbital thats filled so its still reactive not so much as the Alkaline metals but still pretty reactive. Can someone explain it to me? Thanks!!
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top