What is the Total Work Against Gravity for a Laborer Carrying Sacks of Rice?

  • Thread starter Thread starter playlistism
  • Start date Start date
  • Tags Tags
    Physics
AI Thread Summary
To calculate the total work done against gravity by a laborer carrying five sacks of rice, first determine the force exerted by the sacks. Each sack weighs 50 kg, which translates to a force of 490 N (using the conversion 1 kg = 9.8 N). The total weight carried for one sack is the sum of the laborer's weight (600 N) and the sack's weight (490 N), totaling 1090 N. The work done against gravity for each sack is calculated as work = force x distance, resulting in 1090 N x 3.5 m = 3,815 J per sack. Therefore, for five sacks, the total work done is 3,815 J x 5 = 19,075 J.
playlistism
Messages
3
Reaction score
0
A laborer who weighs 600N is to carry 5 sacks of rice from the ground to the second floor of a storehouse. If the distance betweeen floors is 3.5m and the weight of each sack is 50kg of force, find the total work done against gravity if the laborer carries only one sack at a time.

Include your solution please. I really don't get this
 
Physics news on Phys.org
bump, please i really need help
 
anyone use this forum ?
 
1. You posted in the wrong forum (it has been moved). Notice that the 2nd forum listed from the TOP is the Homework/Coursework forum.

2. Look at the guidelines required in the Homework forum. You can't just ask someone to do the whole problem for you. You must show what you have attempted, what you know, and where exactly did you get stuck. No one will do your homework for you.

Unless you do that, not many people here will help you.

Zz.
 
I will make one hint -- double check the question. Kg is not a unit of force or weight.
 

Thread 'Errors and significant figures'

I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
View full post »
Thread 'Minimum mass of a block'

Thread 'Minimum mass of a block'

Here we know that if block B is going to move up or just be at the verge of moving up ##Mg \sin \theta ## will act downwards and maximum static friction will act downwards ## \mu Mg \cos \theta ## Now what im confused by is how will we know " how quickly" block B reaches its maximum static friction value without any numbers, the suggested solution says that when block A is at its maximum extension, then block B will start to move up but with a certain set of values couldn't block A reach...
View full post »
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'

Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is（Figure 2）： F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
View full post »

Similar threads

About the total work done loading and unloading (setting down) an object
Replies
18
Views
2K
Work Done by Gravity and Tension in a Pulley System
Replies
3
Views
2K
Work Done by Person Carrying Groceries Up a Staircase
Replies
3
Views
3K
Pole leaning against wall - Kleppner
Replies
1
Views
7K
What is the total work done on the crate with friction?
Replies
1
Views
2K
Physics Project Ideas for this Competition please (self-propelled car)
Replies
16
Views
3K
Calculating Work Done by Gravity on a 21N Book Falling and Moving on a Shelf
Replies
3
Views
2K
Problem Set Involving Inertia and Balloons
Replies
2
Views
2K
Problem related to work Confused between two answers.
Replies
3
Views
2K
Is Lifting and Dropping a Weight Considered Doing Work?
Replies
1
Views
5K

Hot Threads

Recent Insights

Back
Top