What is the volume of water in a cylindrical cumulus cloud of given dimensions?

  • Thread starter Thread starter scmejla
  • Start date Start date
AI Thread Summary
The discussion revolves around calculating the volume of water in a cylindrical cumulus cloud with a height of 3.6 km and a radius of 1.1 km. The calculations indicate that the lower and higher estimates of water volume are approximately 0.286614 m³ and 2.86614 m³, respectively. Participants express skepticism about these values, suggesting they seem too low for such a large cloud, which would typically contain much more water. The volume of water in a single drop is calculated to be 4.18879 x 10^-15 m³, leading to further questioning of the initial calculations. Overall, the consensus is that the estimated water volume appears insufficient for the size of the cloud.
scmejla
Messages
4
Reaction score
0
Does the solution to this problem look right?

A cubic centimeter in a typical cumulus cloud contains 50 to 500 water drops, which have a typical radius of 10 µm. For that range, give the lower value and the higher value, respectively, for the following.
(a) How many cubic meters of water are in a cylindrical cumulus cloud of height 3.6 km and radius 1.1 km?

Vdrop = 4/3 * pi * (10^-6 m)^3 = 4.18879(10^-15) m^3

Vdrop*50 = 2.0944(10^-13) m^3/(10^-2) m^3 = 2.0944(10^-11)
Vdrop*500 = 2.0944(10^-12) m^3/(10^-2) m^3 = 2.0944(10^-10)

Vcloud = pi * 3.6(10^3) m * (1.1(10^3) m)^2 = 1.36848(10^10) m^3

Lower value = 2.0944(10^-11) * 1.36848(10^10) m^3 = 0.286614 m^3
Higher value = 2.0944(10^-10) * 1.36848(10^10) m^3 = 2.86614 m^3
 
Physics news on Phys.org
scmejla said:
Does the solution to this problem look right?

A cubic centimeter in a typical cumulus cloud contains 50 to 500 water drops, which have a typical radius of 10 µm. For that range, give the lower value and the higher value, respectively, for the following.
(a) How many cubic meters of water are in a cylindrical cumulus cloud of height 3.6 km and radius 1.1 km?

Vdrop = 4/3 * pi * (10^-6 m)^3 = 4.18879(10^-15) m^3

Vdrop*50 = 2.0944(10^-13) m^3/(10^-2) m^3 = 2.0944(10^-11)
Vdrop*500 = 2.0944(10^-12) m^3/(10^-2) m^3 = 2.0944(10^-10)

Vcloud = pi * 3.6(10^3) m * (1.1(10^3) m)^2 = 1.36848(10^10) m^3

Lower value = 2.0944(10^-11) * 1.36848(10^10) m^3 = 0.286614 m^3
Higher value = 2.0944(10^-10) * 1.36848(10^10) m^3 = 2.86614 m^3

Hello Scmejla. Interesting problem. You know that's a big cloud but you're saying it has only .2 m^3 of water. That's only a few buckets full. Surely it has more than that, few truckloads at least. I checked your work. You calculated volume of water in a drop (in cubic meters). That's 4.18*10^-15. For the lower limit, there are 50 of those drops in every centimeter and 1 million cubic centimeters in a cubic meter. Thus, the low limit of the amount of water in 1 cubic meter is how much?

Edit: Alright, maybe 10 or 12 you know what I mean. So how many bucket-fulls of water are in .28 m^3? You know, without calculating it, I'd guess now around 15. I say we figure how many bucket-fulls of water are in that cloud anyway. :smile:
 
Last edited:
Thanx for setting me straight, I should have realized that was an awful small amount for such a big cloud.
 
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top