What is this electromagnetic device called?

AI Thread Summary
The electromagnetic device discussed is identified as an "air core transformer," which features removable cores to enhance voltage generation in the secondary coil. The device operates through electromagnetic induction, utilizing two copper wire coils with specific turns and wire gauges. When an iron core is inserted, the magnetic field strengthens, leading to increased voltage output. The discussion also highlights confusion regarding the reverse effect observed when the core is removed, suggesting a complex interaction in the circuit. Overall, the participants seek clarity on the device's operation and its practical applications.
Josh225
Messages
51
Reaction score
3
What is this electromagnetic device called? I've seen a couple. There is this one: as well as one similar but you must keep the magnet in motion to generate electricity.

I would like to make one of these, but I don't know the name of it which makes it hard to search for instructions and a general overview.

Thanks!
 
Engineering news on Phys.org
Josh225 said:
What is this electromagnetic device called? I've seen a couple. There is this one: as well as one similar but you must keep the magnet in motion to generate electricity.

I would like to make one of these, but I don't know the name of it which makes it hard to search for instructions and a general overview.

Thanks!


From the description give with the video:

Published on Jun 6, 2014
This video shows the operation of an electromagnetic induction. The coil consists of two windings of copper wire, "the primary coil 1, the secondary coil 2." The primary coil is composed of 220 turns of wire 0.40 mm. The secondary coil is composed of 120 turns of wire from 0.85 mm. The working voltage is 28-30 volts AC.
Explanation of the operation:
in the spool of wood were wrapped two coils of copper wire separate between them. When in the central hole of the spool is inserted an iron core, the coil reacts by creating an electromagnetic field. Conversely, by exchanging the terminals of the coils, the electromagnetic force is canceled at the terminals of the wires.

I would call it an "air core transformer".
 
It is a transformer with removable core. When the metal core is inserted the magnetic field becomes stronger and thus it generates stronger voltage in the secondary coil.

However I am not completely sure what he is doing when we see the reverse effect, the voltage to become stronger when the core is removed...
 
Delta² said:
It is a transformer with removable core. When the metal core is inserted the magnetic field becomes stronger and thus it generates stronger voltage in the secondary coil.

However I am not completely sure what he is doing when we see the reverse effect, the voltage to become stronger when the core is removed...
The windings are likely both in series with the bulb in the latter portion of the video. The bolt is drawn in with much less force.
 
  • Like
Likes Delta2
Averagesupernova said:
The windings are likely both in series with the bulb in the latter portion of the video. The bolt is drawn in with much less force.

Thanks!
Like Delta² , I was puzzled by the "that's not quite right" second part of the video.
 
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
Thread 'Beauty of old electrical and measuring things, etc.'
Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
Back
Top