What type of wave is described by this equation

  • Thread starter Thread starter subopolois
  • Start date Start date
  • Tags Tags
    Type Wave
AI Thread Summary
The equation x = (0.15 mm) cos (210x-120t) describes a wave, but its classification is debated. Some participants suggest it may represent a longitudinal wave due to the variable x being used, while others argue that the equation does not conform to standard wave forms. Concerns are raised about the use of the same variable for both displacement and position, which complicates its interpretation. There is uncertainty about whether the wave is transverse or longitudinal, as the equation does not fit typical wave equations. Overall, the discussion highlights confusion regarding the wave's classification based on its mathematical representation.
subopolois
Messages
81
Reaction score
0

Homework Statement


x = (0.15 mm) cos (210x-120t)
what type of wave is described by this equation?

Longitudinal, transverse, angular frequency or both transverse and longitudinal

Homework Equations


NA

The Attempt at a Solution


Theres really no calculation. I thinking its longitudinal because it is given as "x=". if it were transverse I am thinking it would be given as "y="
At the same time I am not even sure if I am right
 
Physics news on Phys.org
Some BS equation you got there.
 
Taking the equation literally, with x on both sides, I don't recognise it as any of the usual wave equations. E.g. For a longitudinal wave, the x on the right would be the mean position of an oscillating segment, while the x on its left would be its displacement at time t; i.e. they should be two different variables.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top