Is Free Cooling Beneficial for Buildings with High Internal Heat Production?

  • Thread starter Thread starter TSN79
  • Start date Start date
  • Tags Tags
    Cooling
AI Thread Summary
Free cooling is the process of producing chilled water using cool outside air instead of chillers, which can be particularly beneficial for buildings with high internal heat production, such as server rooms or printing facilities. The effectiveness of free cooling depends on external temperatures and the specific heat load of the space, as buildings can have consistent cooling needs year-round. In winter, the challenge arises from balancing the need for cooling with the requirement to heat incoming ventilation air, especially when dealing with significant heat outputs from equipment. Proper load calculations and system design are crucial to determine the best approach for maintaining comfortable temperatures. Understanding these dynamics can lead to more efficient energy use and better climate control in high-heat environments.
TSN79
Messages
422
Reaction score
0
I'm trying to understand the concept of free cooling. I've found that this is the production of chilled water without the use of chillers, i.e. the use of cool air. But what I don't get is that if the temperature outside is low, isn't the need for cooling pretty much not there? I only see this to be useful for rooms which have a major internal heat production, like server rooms and such. Is this correct?
 
Engineering news on Phys.org
The question of course is: How cool? Free cooling can be very useful. Do a bit of research (it takes very little) on a Sterling engine and you will know what I mean.
 
Food refrigeration/freezing comes to mind. Rather silly to power a mechanical cooling system when the outside temperature is at or below the temperature of the refrigerator -- especially at a commercial scale.
 
This is entirely dependent on the space load since, as you pointed out, there is negative building envelope load in winter. Depending on the geometry of the building, it is quite common for large portions of an office building to have a relatively constant air conditioning load year-round. So proper load calculations and system conceptualization are the only ways to adequately answer the question.

I'm currently dealing with a printing company who'se presses put off an enormous amount of heat (a megawatt or so). They also have significant exhaust and ventilation requirements, with much of the heat being in that exhaust. Figuring out whether this building needs heat or air conditioning in the winter is a significant problem. At the very least, you can't dump freezing cold air into a building, so the ventilation air needs to be heated somehow, either by heat recovery or mixing with room air.
 
Hi all, i have some questions about the tesla turbine: is a tesla turbine more efficient than a steam engine or a stirling engine ? about the discs of the tesla turbine warping because of the high speed rotations; does running the engine on a lower speed solve that or will the discs warp anyway after time ? what is the difference in efficiency between the tesla turbine running at high speed and running it at a lower speed ( as fast as possible but low enough to not warp de discs) and: i...
Thread 'Where is my curb stop?'
My water meter is submerged under water for about 95% of the year. Today I took a photograph of the inside of my water meter box because today is one of the rare days that my water meter is not submerged in water. Here is the photograph that I took of my water meter with the cover on: Here is a photograph I took of my water meter with the cover off: I edited the photograph to draw a red circle around a knob on my water meter. Is that knob that I drew a red circle around my meter...
Back
Top