Why Do Large Sparks Jump from Leather Belts in Machinery?

  • Thread starter Thread starter bkl4life
  • Start date Start date
  • Tags Tags
    Electric Mystery
AI Thread Summary
Large sparks from leather belts in machinery occur due to the buildup of static electricity. Leather is an insulator, which prevents the flow of electric current, allowing charge to accumulate on the surface. As the belt moves, it generates friction, causing electrons to be transferred and creating a strong electric field. When the electric field strength is sufficient, it can ionize the air, leading to the discharge of sparks. This phenomenon illustrates the interaction between static electricity and materials in motion within machinery.
bkl4life
Messages
25
Reaction score
0

Homework Statement



Explain why large sparks are often seen jumping from leather belts driving machinery.

Homework Equations





The Attempt at a Solution



I know metal chains are off trucks to stop electric static but I'm not sure why leather. Is leather a conductor?
 
Physics news on Phys.org
bkl4life said:
Is leather a conductor?
No, now trying rubbing a something insulating against say a polyester fleece.
 
Electrons move and you feel a shock. Is that the same with the belt. It is moving along metal so the electrons are being transferred which causes sparks? That doesn't seem right.
 
Because it isn't a conductor charge builds up on the belt in exactly the same way
 
So would this be accurate to say:

The leather resists the flow of electric current. Leather cannot break down electrons. A free charge being accelerated by the electrical field will have enough energy to knock electrons from any atom it strikes. These electrons are accelerated and becomes a carrier, which creates two, four, and so on. The leather becomes filled with these carriers and when mixed with air sparks are formed.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top