Why Doesn't Water Leak Out of Dialysis Tubing?

  • Thread starter Thread starter Sascha_K
  • Start date Start date
  • Tags Tags
    Work
AI Thread Summary
Dialysis membranes feature pores that allow selective movement of molecules based on size, with water molecules being smaller than these pores. However, when filling dialysis tubing with water in air, water does not leak out due to surface tension, which effectively holds the water inside the membrane until it is submerged in a buffer solution. The surface tension of water at 25°C is approximately 71.97 dyn/cm. The discussion raises a question about the pore size at which surface tension would no longer contain water, proposing calculations involving the force of surface tension and the pressure required for flow through the pores. A rough estimate suggests that pore diameters around 0.2 to 0.3 mm could allow water to leak out. Additionally, the tubing operates in a dialysis solution that can be modified to enhance the removal of specific substances, demonstrating the versatility of modern dialysis systems.
Sascha_K
Messages
6
Reaction score
1
The way I think about it, the dialysis membrane basically has holes in it of a given size which keep molecules larger than the holes from moving out.

My question is, since the pore size of the tubing is always bigger than the size of water molecules, why doesn't water leak out of the dialysis tubing when you are filling it in air?
 
Biology news on Phys.org
What's the surface tension of water?
 
  • Like
Likes Sascha_K
Aha! I see! Thanks for clearing that up for me!
 
So essentially the surface tension is holding the water inside the bag until it is placed in the buffer, upon which the surface tension is no longer applicable (surface tension of water against air is 71.97 dyn/cm at 25 C)
 
I now have another question: At what pore size will the surface tension fail and allow water to leak out of the bag? Or at least, what are the appropriate equations for calculating such a problem.
 
Assuming a circular x-section for a pore (or a spherical chicken), ηπd (η = surface tension, d = pore dia.) is the force holding liquid in the pore, and force/area (ηπd/{πd2/4}) is pressure required for flow through the pore(s).
 
  • Like
Likes Ryan_m_b, Sascha_K and berkeman
Using a 10 cm long dialysis tube, I roughly estimate that the diameter of the pore would need to be in the vicinity of 0.2 to 0.3 mm
 
  • Like
Likes Ryan_m_b
Looks like a decent ballpark number.
 
You are awesome dude. Not only have you helped me with understanding this (heretofore) seeming contradiction of how dialysis membranes work, but you also helped resolve a friendly argument with a co-worker. Physic forums is awesome, thanks to people like you! :)
 
  • #10
The tubing is a semi porous membrane but remember it runs through a dialysis solution, the content of which can be altered depending on what you want to achieve. The solution exerts an osmotic pull on the waste in the blood removing them. Modern systems can add specific filters to remove certain drugs etc.
 
Back
Top