Work/Energy of Two Bungee Jumpers

  • Thread starter Thread starter kcolman
  • Start date Start date
  • Tags Tags
    Bungee
AI Thread Summary
Two bungee jumpers are analyzed in a physics problem involving energy transfer during a jump from a bridge. The stiffness of the bungee cord is given as k = 80 lb/ft, and the jumpers reach the water's surface at maximum displacement. The discussion focuses on the potential energy converting to kinetic energy when one jumper lets go, leading to a higher ascent for the other. Calculations suggest that the jumper could rise to 240 ft, significantly above the bridge height. However, the downward force from the bungee cord once the jumper ascends is a critical factor that needs consideration.
kcolman
Messages
2
Reaction score
0

Homework Statement


Exercise 1. Two bungee jumpers jump from a bridge. Jumper A is fastened to a bungee cord and holding on to jumper B. The cord has a stiffness k = 80 lb/ft. Find the unstretched length of the cord if the two students just reach the surface of the water at the maximum displacement. If student A let's go of student B at the surface of the water. Is there a problem for student A on the return? The distance between the bridge and water is 120 ft.


Homework Equations


T1 + ƩU1-2 = T2
U1-2 = -WΔy Work of a weight
U1-2 = -ksΔs2 Work of a Spring Force


The Attempt at a Solution



I solved the first part by using the principle of work and energy, setting T1 and T2 to zero and solving for the s-initial. However, I'm having trouble with the second part. I know that the potential energy from the first part gets transferred to the bungee jumpers kinetic energy in his ascension, and that his final height will be higher than if he didn't let go of the other bungee jumper. Also, I know his final kinetic energy will be zero at his maximum height, and I think the question wants to know if this height will be greater than the height of the bridge over water. Any thoughts?
 
Physics news on Phys.org
welcome to pf!

hi kcolman! welcome to pf! :smile:
kcolman said:
… I know that the potential energy from the first part gets transferred to the bungee jumpers kinetic energy in his ascension, and that his final height will be higher than if he didn't let go of the other bungee jumper. Also, I know his final kinetic energy will be zero at his maximum height, and I think the question wants to know if this height will be greater than the height of the bridge over water.

that analysis looks correct …

so will it be greater? (if so, by roughly how much?) :wink:
 
Okay, I think I figured it out. I realized that the energy from the spring is equal to the total original gravitational energy, and set that equal to the work done by gravity with the weight cut in half. So my work looks like:

(1/2)kΔs = (W1+W2)y1
(1/2)kΔs = W1*y2
y2 = ((W1+W2)y1)/W1
y2 = (300 lb * 120 ft) / (150 lb)
y2 = 240 ft

So he doubles his initial height on his ascension... Probably hits his head pretty brutally. Does this look right?
 
hi kcolman! :smile:

yes, it will certainly rise well above the bridge

but it's not clear to me whether you've taken into account the downward force that the bungee rope will exert once he gets above the bridge

(and now I'm off to sleep :zzz: …)
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top