Would high voltage DC power grids work the same?

AI Thread Summary
High voltage DC (HVDC) power grids could function similarly to AC grids if an effective method for transforming DC voltage were developed. Currently, AC is preferred for its ease of voltage transformation and the ability to utilize the Earth as a ground without relying on it as a return path for current. Three-phase AC systems operate with currents that are 120 degrees apart, ideally eliminating the need for an Earth return. The discussion also touches on the concept of single wire earth return (SWER) systems, which utilize the ground in a different capacity. Overall, while DC transformation is conceptually possible, practical implementation remains a challenge.
greypilgrim
Messages
579
Reaction score
44
Hi.

As far as I know, the main reason for using AC in electric power transmission is that voltage can easily be transformed.

If there was a similarly easy way for transforming DC, would power grids work basically the same? To be more specific, how much does AC power transmission rely on the Earth as ground working as a capacitor rather than an ohmic resistor?
 
Engineering news on Phys.org
greypilgrim said:
Hi.

As far as I know, the main reason for using AC in electric power transmission is that voltage can easily be transformed.

If there was a similarly easy way for transforming DC, would power grids work basically the same?

Yes there is a way of transforming DC, but only conceptually so far. See this recent thread.
https://www.physicsforums.com/threads/dc-to-dc-power-transformer.921023/

greypilgrim said:
To be more specific, how much does AC power transmission rely on the Earth as ground working as a capacitor rather than an ohmic resistor?

No. Three phase power systems don't need the ground connection. The currents in the three phases are 120 degrees apart, they add up to zero so ideally there is no need for an Earth return. There are other reasons for neutral to ground earthing, but not to return the power current.
 
greypilgrim said:
To be more specific, how much does AC power transmission rely on the Earth as ground working as a capacitor..

Got a reference for that?
 
While I was rolling out a shielded cable, a though came to my mind - what happens to the current flow in the cable if there came a short between the wire and the shield in both ends of the cable? For simplicity, lets assume a 1-wire copper wire wrapped in an aluminum shield. The wire and the shield has the same cross section area. There are insulating material between them, and in both ends there is a short between them. My first thought, the total resistance of the cable would be reduced...
Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
I am not an electrical engineering student, but a lowly apprentice electrician. I learn both on the job and also take classes for my apprenticeship. I recently wired my first transformer and I understand that the neutral and ground are bonded together in the transformer or in the service. What I don't understand is, if the neutral is a current carrying conductor, which is then bonded to the ground conductor, why does current only flow back to its source and not on the ground path...
Back
Top