Final Definition and 1000 Threads

Final Destination is an American horror franchise composed of five films, two comic books, and nine novels. It is based on an unproduced spec script by Jeffrey Reddick, originally written for The X-Files television series, and was distributed by New Line Cinema. All five films center around a small group of people who escape impending death when one individual (the protagonist of each film) has a sudden premonition and warns them that they will all die in a terrible mass-casualty accident. After avoiding their foretold deaths, the survivors are killed one by one in bizarre accidents caused by an unseen force creating complicated chains of cause and effect, resembling Rube Goldberg machines in their complexity, and then read omens sent by another unseen entity in order to again avert their deaths.
The series is noteworthy among other films in the horror genre in that the antagonist is not a stereotypical slasher or other physical being, but Death manifested, subtly manipulating circumstances in the environment with a design on claiming anyone who escapes their fated demise.
In addition to the films, a novel series, which includes the novelizations of the first three films, was published throughout 2005 and 2006 by Black Flame. A one-shot comic book titled Final Destination: Sacrifice was released alongside select DVDs of Final Destination 3 in 2006, and a comic book series titled Final Destination: Spring Break was published by Zenescope Entertainment in 2007.

View More On Wikipedia.org
  1. hraghav

    Find the final temperature of the combined honorite and odium?

    Qmelt, honorite = (m honorite)⋅(Lfusion, honorite) Qmelt, honorite = 4.51kg⋅15500J/kg = 69905J Qcool, odium = (m odium)⋅(Cliquid, odium)⋅(391.14K−331.44K) Qcool, odium = 14.69kg⋅431.1J/kgK⋅(391.14K−331.44K) Qcool, odium = 378071.6823 Qfreeze, odium = (m odium)⋅(L fusion, odium) Qfreeze, odium...
  2. chocopanda

    Mixing two gases in an isolated system and calculating final p and T

    Hey everyone, I have an attempt at fully solving this problem (my final pressure is ##p_f = 5373,64 hPa##, final temp. is ##T_f = 303,15K = 30C##), but this exercise confuses me very much. First, I have not used the masses in my calculations and I'm pretty sure my prof. accidentally copypasted...
  3. M

    Final Angular Momentum of a Space Station

    Li = Lrf +Ltf Iωo = Iωf + mvRsinθ I = MR^2 (MR^2)ωo = (MR^2)ωf + mvRsinθ ωf = (MR^2ωo -mvRsinθ)/MR^2 = 3.99
  4. brochesspro

    The final velocity of a ball rolling while slipping.

    Here is the problem statement along with the figure. Here, I take the right-ward and anti-clockwise directions to be positive. After the ball collides with the wall, its angular velocity remains the same and its velocity changes direction while remaining the same in magnitude. Using the...
  5. A

    Final velocity involving a can of soup and an inclined plane

    a = 9.8*sin(25*pi/180)=>a=4.1417 m/s^2 vf^2=vi^2+2*a*s=>vf=sqrt(0^2+2*4.1417*3)=>vf=4.9850 m/s Meanwhile the correct answer is: (vf+vi)/2=>(vf+0)/2=2=>vf=4 m/s Why is my answer wrong? It seems that the acceleration is what is wrong, but I don't understand why.
  6. paulimerci

    Find the final velocity of the bobsled after the last bobsledder jumps in

    For calculating the total impulse, I'm taking the individual impact force times the elapsed time and adding them all together to get the total impulse. Given F = 25N, ## \Delta t_1 =3 secs##, ##\Delta t_2 = 4secs##, ## \Delta t_3 = 5secs##, ## \Delta t_4 = 6secs##. $$ Impulse 1 = F \Delta t_1 $$...
  7. A

    Finding the final speed of a space probe using work and kinetic energy

    First I found work: W=(3.85x10^5)(2.45x10^8) W= 9.43x10^13 Then used that for difference of kinetic energy: 9.43x10^13 = (1/2) (4.55x10^4)v2^2 - (1/2)(4.55x10^4)(1.22x10^4)^2 9.43x10^13 = (22750)v2^2 - 3.386x10^12 9.43x10^13 + 3.386x10^12 = (22750)v2^2 9.77x10^13 = 22750v2^2 9.77x10^13/22750...
  8. paulimerci

    A cart collides with a bumper -- Find the final displacements, etc.

    I'm using conservation of energy to solve for both a) and b). a) Initially, the cart is released from rest, which has maximum GPE at the top of the inclined plane. U_g is converted to K.E as it reaches the bottom of the incline. $$ E_i = E_f $$ $$ U_g = K.E_f$$ $$ 2mgh = \frac {1}{2}2mv^2$$ $$ v...
  9. Elaren

    Final velocity of a block on a spring pulled downhill

    Note: wording is ambiguous so I assumed spring started from equilibrium, in which case it stretches as we go downslope. Final height (at lower point on slope) is 0. Distance along slope = Distance the spring stretches = d= ##s_f## = ##2/cos{\theta}## =2.13 Height change = h = ##2 tan{\theta}##...
  10. H

    Calculating how many revolutions it takes to reach the final speed

    11 rpm equals 1.15 rad/ sec not sure how this helps contribute to the question but I solved for it just in case
  11. E

    Final year raytracer project ideas

    Hi there. I am about to enter my final year of a computer science bachelor degree and must do a final year project that spans most of the academic year. I have some experience on the artistic side of computer graphics but none in the computer science side. I would be interested in developing...
  12. GhostLoveScore

    B Effect of JWST mirror damage on final images

    As most of us know, James Webb Space Telescope suffered a damage to one of its mirror segments due to meteoroid impact. How will that damage show in the images? Some people on certain forum I visit say that there will be some artifacts visible in only one part of the image, but that doesn't...
  13. E

    Final year University Project, Music Visualisation question

    Hi there. I start my final year of my computer science degree this September and, alongside other modules, will do an independent final year project. I have not had very much CS experience outside my degree so I am a bit unsure what would be feasible for me while not being too trivial such that...
  14. S

    Calculating Max Tension, Final Angle for Swinging on Rope Over Lake

    Please tell me if I need to post my solution for this.., but I just have a question more or less 'conceptual' question about (c). so I know that from Newton's 2nd law for centripetal acceleration --> ##F_{rope} - mgcos(\theta) = ma_n## where ##a_n = \frac {v^2}{R}## such that where the normal...
  15. G

    Find v_1 for projectile using start position, final position and angle

    I have attempted the problem a few times, and have posted my work below. I thought to check my work using ## v_x t = v_1 \times \cos\theta \times t = \Delta x## to see if I get back expected results, and I did for the horizontal motion (the substitutions are from the numbered steps below): ##...
  16. Anmol Dubey

    Calculating final rotational speed from angular velocity

    I have no idea how to go about this. Any help would be appreciated thanks :) Edit: I converted the 1.5 rev/s to rad/s = 9.4 rad/s
  17. A

    I When are the initial and final momentums the same (conserved)?

    In a system with no external force like gravity, the final and initial momentums are conserved. If we have a firework that explodes radially (disregarding gravity), the momentum before the explosion should equal the momentum after explosion. But isn't the explosion caused by an external force?
  18. H

    B Optimal Final Jeopardy Strategy: All In or Zero?

    Once in Final Jeopardy the first contestant held $1000 with the other two tied with $12,000 apiece. The first bet $999 and got the question wrong, leaving him with one dollar. The other two both bet their entire stake and got the answer wrong, leaving them with zero dollars. The first...
  19. rudransh verma

    B Is the final velocity of a Tossed tomato the same as its initial velocity

    When a tomato is thrown up with a velocity ##v_0## it’s kinetic energy is 1/2mv_0^2. It will stop at the top and then again comes back to the launch point where it’s kinetic energy will be same as before, 1/2mv_0^2. How is this possible? Also when we throw the tomato up how can you be so sure...
  20. polpolpol

    Python Looking for guidance on my final project

    My project is on threat modelling and prediction. The use of threat modelling with machine learning. So far I've found articles that use MITRE ATT&CK repository with STIX used with machine learning and data mining with CVSS, but I'm unsure if this is the right track. I basically just need to...
  21. shivajikobardan

    Python Which project should I choose for a final year major project?

    My criteria for choosing this project-: 1) Should be easy. 2) Should be doable in 1.5 months. 3) Should not to be too easy and should be just hard enough to be a major project. 4) It is a group project but since this is nepal lol mainly 1 person is going to do it. max 2 persons will do this...
  22. shivajikobardan

    MHB Choosing an Elective for Final Year Engineering Students

    How do I choose a good elective? I want sth that gives me good marks as i am in final year 2nd semester. I want sth that has good courses over the internet. I don’t want you to pick it up for me but in general just guide me about how to choose the elective? I will put only ones that I am...
  23. M

    Final semester project ideas using CMOS VLSI?

    Guys ! I need your help in choosing a better project for my last semester .Can anyone suggest me projects based on CMOS VLSI Technology.?
  24. M

    Find Final Kinetic Energy of a particle subject to two forces

    I'm having trouble putting the rest of the equations together, I believe I need the different from (0,0,0) to (1,0,0) and then (1,0,0) to (1,1,0) right? Then solve for x direction and y direction. What would I use for Wnc tho? I'm very confused.
  25. guyvsdcsniper

    TIme needed for a capacitor to reach a fraction of its final charge

    I am a little lost on the last step of this problem. I get that we want to know how much time elapses for the capacitor to reach 2/3 of its final charge. That is why 2/3Qf is equal to Qf(1-e^-t/RC). I don't understand how we make the jump to e^-t/Tau is equal to 1/3? and then somehow e^-t/Tau...
  26. F

    Physics Career Advice For Final Year Physics Student (UK)

    Hi Everyone, As the title suggests, I'm looking for some career advice. I want to go into software development (but feel free to suggest any other areas where I might be a good fit, I've also been looking at risk analysis positions). I have experience in a bunch of different areas but it feels...
  27. mncyapntsi

    1-D Motion, calculating final velocity

    Hello! I have done this problem : vf^2 = (4.0x10^5)^2 + 2(6.0x10^12)(5x10^-3) so vf= sqrt((4.0x10^5)^2 + 2(6.0x10^12)(5x10^-3)) I get vf = 4.7 x 10^5 m/s However, the textbook solutions says vf = 8.7x10^5 m/s. Where did I go wrong? Thank you for any help! :)
  28. Rubberduck2005

    A slightly complex pully problem missing the final step

    so I have already done most the work in finding the following things M1A1=M1g-T1, M2A2=M2g-T2 T2=2T1 M2A2=M2g-T2 and then through further working out(use of the invariance of length of L1 and L2 the strings attached to M1 and M2 then finding A1=-2A2) A1=2g(2M1-M2)/(4M1+M2) and...
  29. D

    A Fidelity between initial and final states

    I have a state |0>|alpha>. Now I want to evolve this state at any time t and find the fidelity between the initial and final states. Any ideas how to do that? My main problem is that I don't know how to evolve this state.
  30. alya

    Help Needed: Deriving Formula for Computer Undergrad's Final Project

    My mentor wants the derivation of this formula. Me a computer undergrad, unable to figure it out, and my final project are on a halt due to this, any help from the community is greatly appreciated!
  31. Krokodrile

    Engineering Final volume of a gas using the ideal gas equations

    Hey there! for this problem i try to use the combinate gas ecuation. First of all the values its necesary to have it in absolutes: 70 F = 527.67 K 90 F = 549.67 K The ecuation looks like: (200 psig) (1 ft^3)/529.67 K = (0.3 InHg) V2/549.67 K I can eliminate "K" but not psig with InHg for obtain...
  32. H

    What is the final angular velocity of the system after the collision?

    I calculated as attached and got it right. However, I just wonder why we can't use conservation of energy as the question has already specified 'frictionless', meaning no energy loss and energy distributed to the rotation only.
  33. J

    Calorimetry - finding the final temperature of a system of ice and water

    So all of the ice melts and I am guessing it then warms some so Q=mL+mc(change in T) for the water that cools down Q=mc(change in T) Q_cold = -Q_hot so -mc(Tf - Ti) = mL+mc(Tf - Ti) My issue is that I have 2 unknowns. I don't know the specific heat capacity of water and I don't know the...
  34. G

    B Question about final k.e. of alpha and Polonium after decay of Radon

    Hi community, I've been looking through this question And I have a conceptual if I may (this is not homework I'm a 52 year old programmer just trying to learn and understand). You can calculate the mass loss of 0.006 u when you go from the Radon nucleus to the Polonium and alpha particle. You...
  35. A

    I Add an exponential number of elements, what will be the final cardinality?

    Suppose we construct a set, adding at each step a polynomial number of elements. My impression that after we do countably infinite number of steps, the set will have countably infinite cardinality. But what happens if we add exponential number of elements each step? For instance, on step 0 we...
  36. J

    Escape Velocity Question: Why is the final kinetic energy = 0?

    So Ekf-Eki+Epf-Epi=0. I understand that the final potential energy is 0 (distance away approaches infinity), but don't get why the final kinetic energy becomes 0. If the final kinetic energy was 0, wouldn't that mean the object no longer has any velocity and would start being effected by the...
  37. J

    Work Problem: Spring and Friction, find final Speed

    First calculated non conservative work from friction using Ff=umg. Non conservative work was -8.82. Initial kinetic energy, 1/2mv^2, was 136.89. Change in potential energy, 1/2k(x)^2, was 8.1216. Ekf-Eki+Change Ep=Work NC Ekf=W NC+Eki-change Ep =-8.82+136.89-8.1216=119.9484 Ekf=1/2mv^2...
  38. T

    B Nature: "A massive white-dwarf merger product before final collapse"

    Hey guys! I read this fascinating paper about the discovery of a white dwarf merger remnant: https://www.nature.com/articles/s41586-019-1216-1 To quote the abstract: "For white dwarfs, the mass of the merger product may exceed the Chandrasekhar limit, leading either to a thermonuclear explosion...
  39. greg_rack

    Final electric potential difference in a circuit with two capacitors

    So, each capacitor must have a different potential difference, given by its capacity and charge... this would cause charge and current accordingly to flow in the circuit. But how do I determine the final potential difference, which would of course be the same for both of them? I have tried...
  40. WMDhamnekar

    MHB What is the final pressure of helium and neon gas mixture in this case?

    The answer given to the above question is Final pressure$=\frac{(10.0mol\times 5.00bar) + (5.00 mol \times 20.0 bar)}{(10.0 mol +5.00 mol)}= 10.0 bar$ Is this answer correct? if yes, How and why? My question is while computing this answer, the volumes of each gas is not considered. Note:-...
  41. F

    I How to Get Final Fisher Matrix from 2 Matrices

    I have 2 Fisher matrixes which represent information for the same variables (I mean columns/rows are the same in the 2 matrixes). Now I would like to make the cross synthesis of these 2 matrixes by applying for each parameter the well known formula (coming from Maximum Likelihood Estimator...
  42. nish95

    Final Image position for a setup with two lenses

    First image is an object for the concave lens so won't +ve direction change from right to left?! In that case, object distance will be -ve (from concave lens towards right side). Any ideas? Solution in the book takes first image's distance to be +ve. See attached ray diagram for clarification...
  43. M

    Calculating Final Positions & Velocities for M1, M2 & Spring After DeltaT

    Let's say you have two masses on either side of a spring. Mass 1 is connected to the end of a spring. The spring itself has no mass. Mass 2 is free in space. So you have: [M1]-[spring] [M2]So it's more descriptive, I'll name the variables like you might in programming. Let's define...
  44. Q

    Finding the final y-position of a projectile

    Summary:: After firing a projectile from the top of a hill, where does it land on the hill? I disagree with the professor in approach and final result. Problem Statement: Relevant Formulas: Attempt to Solve: I'm very familiar with these types of problems. I'm not here for help solving...
  45. jamiebean

    The final velocity = initial velocity + acceleration x time

    I first calculated initial velocity: √7.09^2+1.07^2=7.17028 acceleration=√7.22^2+2.47^2= 7.63 then i substituted all values into this equation: final velocity=initial velocity + acceleration x time so, final velocity=82.0285 so the magnitude= final velocity-initial velocity= 74.858271 is...
  46. SamRoss

    Not sure where this final Hamiltonian came from

    Here's the problem and the solution provided online by the author (the problem numbers are different but it's the same question). I think I'm okay up until the last step where he declares the Hamiltonian is (1 1 1 -1). Where did he get those components?
  47. PainterGuy

    B How Can I Reverse a Trigonometric Identity to Find Original Constants?

    Hi, K₁cos(θt+φ)=K₁cos(θt)cos(φ)-K₁sin(θt)sin(φ)=K₁K₂cos(θt)-K₁K₃sin(θt) Let's assume φ=30° , K₁=5 5cos(θt+30°) = 5cos(θt)cos(30°)-5sin(θt)sin(30°) = (5)0.866cos(θt)-(5)0.5sin(θt) = 4.33cos(θt)-2.5sin(θt) If only the final result, 4.33cos(θt)-2.5sin(θt), is given, how do I find the original...
Back
Top