Need help with impulsive tension in an inextensible string.

  • Thread starter Thread starter franklinear
  • Start date Start date
  • Tags Tags
    String Tension
AI Thread Summary
The discussion revolves around calculating the impulsive tension in an inextensible string connecting three particles after an impulse is applied to one of them. The problem involves three particles A, B, and C, positioned at a 120-degree angle, with B receiving an impulse at a specific angle. The user struggles to derive the correct velocities and tensions despite having solved a similar problem previously. Key results indicate the impulsive tensions and initial velocities for each particle based on the applied impulse. The thread seeks assistance in understanding the solution process for this specific scenario.
franklinear
Messages
9
Reaction score
0
1. The problem statement, all
variables and given/known
data


Three particles A, B and C all of mass m rest on a smooth horizontal plane so that angle ABC is 120 degree. B is connected to both A and C by light inextensible string which are initially just taut. An impulse J is then applied to particle B in a direction making an angle of 150
with BC and 90 with BA.
Find impulsive tension in each string and the initial velocity of each particle.

2. Homework Equations

3. The Attempt at a Solution
I could do one similar question i.e. when the impulse is applied to B making a horizontal direction to the right. The horizontal velocity of A and B would be the same but A also experiences vertical move. However for this question, I can't solve it. I've tried many times but still don't get the point.


key answers given:
J √3 / 15; 4J√3 / 15
v A: J√3 / 15m along AB
v B: 2J√21 / 15m at arctan 3√3 to AB
v C: 4J√3 / 15m along CB

Please help me. Thanks in advance!
 
Physics news on Phys.org
I've replied to your other post on TSR.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...

Similar threads

Back
Top