Hollow sphere rolling down a slope

AI Thread Summary
A hollow spherical shell with a mass of 2.50 kg is analyzed as it rolls down a 35-degree slope. The discussion focuses on calculating the acceleration, friction force, and the minimum coefficient of friction to prevent slipping. The participant initially struggles with the lack of a radius for calculating the moment of inertia but considers using energy conservation principles to solve the problem. They suggest that the radius may not ultimately affect the outcome and acknowledge the need to relate linear and angular velocities. The conversation concludes with the participant feeling more confident in their approach after receiving guidance.
PirateFan308
Messages
91
Reaction score
0

Homework Statement


A hollow, spherical shell with mass 2.50kg rolls without slipping down a slope angled at 35.0 degrees.
i) Find the acceleration
ii) Find the friction force
iii) Find the minimum coefficient of friction to prevent slipping


Homework Equations



F=ma

I=\frac{2MR^2}{3}

Energy must stay constant:
E_{p}+E_{kr}+E_{k} = E_{p}+E_{kr}+E_{k}

mgh+\frac{1}{2}Iw^{2}+\frac{1}{2}mv^{2}=mgh+\frac{1}{2}Iw^{2}+\frac{1}{2}mv^{2}

The Attempt at a Solution


I really have no idea where to start, because a radius is not given, so I cannot find the moment of inertia. I was thinking if I used the energies, and said that

mgh=\frac{1}{2}mv^{2}+\frac{1}{2}Iw^{2}

mgh=\frac{1}{2}mv^{2}+\frac{1}{2}((\frac{2}{3}mR^2)w^{2}

because we could use a pretend example, say that the sphere starts at rest at the top of the ramp, and in the end, all the energy is kinetic. But from here, I'm not really sure where to go. Thanks!
 
Physics news on Phys.org
Who knows, maybe it will turn out that the radius doesn't matter! If not, then an R in the answers will be expected. Go ahead and do it with an R and see. You will need v = r*ω, too.

You energy approach looks good. No doubt it could also be done with force, acceleration, etc.
 
Example.
http://www.feynmanlectures.info/solutions/roll_without_slipping_sol_1.pdf
 
I think I figured it out. Thanks!
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top