Engineering Alternator Problems (3 phase and single phase AC Motor)

AI Thread Summary
The discussion revolves around solving complex problems related to alternators, including calculations for generated voltage at different power factors and determining open-circuit voltage for various configurations. Participants express a need for guidance on the procedures to tackle these calculations rather than seeking direct answers. Specific scenarios include a 4MVA, 3-phase alternator and a single-phase alternator, with emphasis on understanding the underlying principles. The urgency for assistance is highlighted, as one participant requires solutions by the next day. Overall, the thread focuses on collaborative problem-solving in electrical engineering.
asteg123
Messages
12
Reaction score
0

Homework Statement



1. A 4MVA, 13.3kV, 60Hz, 3 phase, delta-connected alternator has an effective resistance of 5.2 ohm/phase and a combined armature reactance of 54 ohm/phase. Determine the full-load generated voltage per phase, a. At unity pf, b. at 0.8 pf lagging, and at 0.866 leading pf.

2. A 750kVA, 2300V, delta-connected, 3-phase alternator has had open and short circuit tests performed and the following date were obtained:

Short Circuit test

Field current = 31.5A
Line current = rated

Open-circuit test

Field-current = 31.5A
Line voltage=1050V

The dc resistance across the terminals was measured at 0.38 ohm. Calculate the V.R. at 0.8pf lagging.

3. Calculate the open circuit votlage of a 3phase, star-connected alternator, 4 pole, 60Hz, 120 slots with each slot having 6 conductors in two layers. The machine is running at 1800rpm with a flux per pole of 125 milliWeber. The coil span is 12.

4. A single phase alternator, 50kVA, 460V supplies the rated load at 0.88 pf lagging. The dc resistance across the terminals ais 0.5 ohm and the synchronous reactance is 2.5 ohm. Calculate the angle of the power.


Homework Equations





The Attempt at a Solution



I have completely no idea on how to solve these problems...

I don't need the direct answers, I just want you guys to help me solve it, more on the procedure of solving it. Suffice to say, i want you guys to guide me in solving these problems.
 
Physics news on Phys.org


you know, I'm also wondering how to solve this exact 4 questions..

are you my classmate or something?!

i hope someone solves this ASAP.. coz I'm really desperate.. i need the solutions by tom.. :cry:
 
1. Find the number of armature conductors in series per phase required for 3 phase, 10 pole alternator when driven at a speed of 600 RPM. Armature has 90 slots and armature winding is star connected to give induced emf of 11KV between lines. Assume flux per pole as 16 mwb?
 
hey guys please help me in above problem...
 

Similar threads

Engineering How to calculate rotor flux of the three phase squirrel cage induction motor?
Replies
4
Views
3K
Synchronous Machine Homework Help: Calculating Generated Voltage and Power Angle
Replies
1
Views
3K
Engineering Intro to 3-Phase AC Motors: Understanding Wattmeter Measurements | Help Needed
Replies
10
Views
2K
Engineering How do single phase AC induction motors start in everyday home appliances?
Replies
1
Views
3K
Engineering P= 1.732 X 230V X 42A X 0.85 = 10,731.06 W or 10.73 kW
Replies
7
Views
3K
Engineering 3 PHASE CIRCUIT PROBLEM - Haaalllppp
Replies
2
Views
2K
Engineering Transmission line 3 phase double circuit problem
Replies
7
Views
6K
Engineering Using the Short Circuit Test on a Single Phase Transformer?
Replies
1
Views
2K
The phase difference between current and voltage.
Replies
30
Views
4K
Question about single phase AC motors
Replies
30
Views
8K

Hot Threads

Recent Insights

Back
Top