Calculating Orbital Distance for a Satellite in Circular Orbit around Mars

  • Thread starter Thread starter Dark_Dragon
  • Start date Start date
  • Tags Tags
    Mars Satellite
AI Thread Summary
NASA plans to place a satellite in a circular orbit above Mars' equator, requiring calculations for the orbital distance from the Martian surface. The discussion involves applying gravitational and centripetal force equations to determine the necessary orbital radius. The correct approach involves using the relationship between orbital velocity and period, leading to the equation T²/R³ = 4π²/GM. Participants confirm that the period of Mars is approximately 8.86 x 10^4 seconds, and the mass and radius of Mars are also provided. Ultimately, the calculations will yield the satellite's required orbital distance.
Dark_Dragon
Messages
14
Reaction score
0
NASA wants to fire a satellite into a circular orbit around Mars that will maintain 'station' above the Martian equator.
what is the distance from the surface of mars?


ok first of all does the term 'station' refer to when g = 0?

and the equation I've used is:
Fc = Fg
mv²/r = GMm/r²

the two 'm' values cancel out and then I am left with:

v²/r = GM/r²

is it then possible to transform the equation into:

r = (GM/r²)*v²

is this procedure correct?
 
Physics news on Phys.org
By stationary it means that it will remain at that altitude, not falling or going up at all. Also I think given the context it means that it will be in a geostationary orbit, so it's period is the same as the planets rotational period. (I.e for the earth, it's period would be 24 hours, you'll have to look up the value for mars).

The first step you've used is correct;

\frac{v^2}{r} = \frac{GM}{r^2}

but check the next step...remember you're multiplying by r...not v.

Next can you think of a way of expressing the period of the shuttle in terms of the velocity? (Hint: think of the orbit as a circle, with radius 2pi r, if it's going at speed v, what is the time period T?) You'll have to think of a way of getting that T into the equation above to solve for r.
 
period of rotation of Mars = 8.86 x 10^4 s
mass of Mars = 6.42 x 10^23 kg
Radius of Mars = 3.40 x 10^6 m

if i use v=2πr/T
v = 2*π*3.4e+6 / 8.86e+4
=241.1 m/s

wait, so would my new equation be:
r³ = GM/v² ?

or would i have to go back a few steps and turn it into:
4π²r/T² = GM/r²

if i took that step my equation could then become:
T²/R³ = 4π²/GM
 
Dark_Dragon said:
or would i have to go back a few steps and turn it into:
4π²r/T² = GM/r²

if i took that step my equation could then become:
T²/R³ = 4π²/GM

This is spot on, so now you know the time period, you can find out the radius of its orbit.
 
ok thank you so much for your help =)
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Back
Top