Question about an experiment to make carbon boride

  • Thread starter Thread starter Warpspeed13
  • Start date Start date
  • Tags Tags
    Carbon Experiment
AI Thread Summary
To create a suitable environment for the reaction in a repurposed propane tank as a reaction chamber, it is essential to consider the atmosphere within the chamber. Filling the chamber with argon can be sufficient for certain reactions, but a vacuum may be necessary for others to prevent unwanted reactions with oxygen or moisture. The required level of vacuum depends on the specific reaction being conducted, with higher vacuums generally providing a safer and more controlled environment. Safety concerns are paramount, and the experiment's risks should be carefully evaluated before proceeding.
Warpspeed13
Messages
125
Reaction score
2
Ok what kind of environment do I have to create for the reaction to take place? I'm turning an old propane tank into a reaction chamber and to achieve the temperatures required for reaction I will run a DC current through the material. Will filling the chamber with argon be sufficient or does it need to be a vacuum chamber? If so how much of a vacuum is necessary?
 
Chemistry news on Phys.org
I am not convinced it is a safe enough experiment to be discussed here.

Topic locked.
 

Thread 'Humidity of a saturated NaCl solution with anticaking additive'

I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
View full post »

Similar threads

Just curious about many things like hydrostatics
Replies
28
Views
4K
Simple experiment to measure atmospheric Oxygen
Replies
4
Views
4K
I need some kind of propellant gas for an experiment
Replies
6
Views
2K
Chemical/Paint Make Your Own Refillable Aerosol Spray Can
Replies
4
Views
6K
Superconducting motor thought experiment/ questions
Replies
1
Views
2K
I have a few questions about refrigeration and AC units
Replies
1
Views
3K
Vacuum chamber for filling bee comb
Replies
5
Views
3K
Electroplating of platinum/palladium etc on copper, brass question
Replies
9
Views
4K
How Can Plasma Be Created and Ignited in Toroidal Fusion Reactors?
Replies
4
Views
4K
How important is it to keep an air motor warm?
Replies
11
Views
2K

Hot Threads

Recent Insights

Back
Top