Help calculating light intensity

AI Thread Summary
To find the luminous intensity of a light source producing 7.50 lux at 30 meters, the formula E = I/(4*pi*(r^2)) is used, where E is illumination, I is luminous intensity, and r is distance. The calculation attempted resulted in an incorrect value due to potential confusion between photometric and radiometric units. It's important to clarify whether the light source is an isotropic point source or an extended Lambertian radiator, as this affects the calculations. The discussion highlights the need for understanding the relationship between lux and lumens, emphasizing the complexity of radiometry and photometry. For accurate results, further study and clarification of the source type and unit conversions are recommended.
Mastagamer
Messages
1
Reaction score
0
This is the question

Find the intensity of a light source that produces an illumination of 7.50 lux at a distance of 30m from the source.

This what I get but it's wrong
84823

This is the formula

E = Illumination
I = luminous intensity of the source ( in lumens)
r= distance between the source and the illuminated surface.

1 lux = 1lm/m^2

Formula E = I/(4*pi*(r^2)

So I did I = E*(4*pi*(r^2)

I =?
E=7.50
r = 30m

I = 7.50lux*(4*pi*(30m^2)


and got I = 84823

rounded in many different forms and I still get a wrong answer.. Any help would be appreciate it.

and is wrong because the computer practice test tells me but doesn't give me an answer.
 
Last edited:
Physics news on Phys.org
Blech. Radiometry: that evil, dismal science. :)

First, you need to know more about the source- is it an isotropic point source? Extended Lambertian radiator? It matters. Second, check the units: 'lux' is a photometric unit, meaning the conversion to radiometric units (intensity) requires knowledge of the wavelength (or waveband!)

As written, the question is potentially meaningless, because of the (possible) mix of photometric and radiometric units. As it happens, there is a photometric term also called "luminous intensity" in units of lm/sr (candela [cd]). First, let's parse the question:

7.5 lux at a distance of 30 m: the incidance of light onto a surface 30 m away from the source is 7.5 lm/m^2. This implies (to me), that we have an isotropic point source freely radiating into 4*pi sr.

It's possible the question instead refers to an extended radiator, with an excitance of 7.5 lx. If the radiator is Lambertian, the radiated power does not depend on relative angle between the radiant surface and the detector, which simplifies things. The total radiated power is 7.5 *source area (lm), the received power is that fraction of solid angle (out of 2*pi) subtended by the detector.

Maybe the idea is to teach you how to convert areas into steradians? For small (solid) angles,\Omega = A/r^{2}

thus, 7.5 lx at 30 m converts to 8.3*10^-3 cd, if I did that correctly...

Like I said, radiometry and photometry can be incredibly confusing. Check out William Wolfe's "Introduction to Radiometry" (Tutorial Texts, SPIE press, vol TT29) for a really clear discussion.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...

Similar threads

Back
Top