A British Concorde and a French Concorde leave, going in the same direction

  • Thread starter Thread starter TNewC
  • Start date Start date
  • Tags Tags
    Direction
AI Thread Summary
The discussion focuses on a problem comparing the travel times of a British Concorde and a French Concorde over a distance of 40,000 km. The British Concorde travels half the distance at 2500 km/hr and the other half at 1000 km/hr, while the French Concorde spends half its time at each speed. A participant initially struggles with calculating the French Concorde's time but receives clarification on how to approach the problem by combining distances traveled at both speeds. The solution involves setting up an equation that accounts for the total distance and the respective speeds. Ultimately, the participant gains a clearer understanding of the calculations needed to determine which Concorde arrives first.
TNewC
Messages
11
Reaction score
0

Homework Statement


Both Concords are going 40 000 km.
The British Concorde spends half its DISTANCE at 2500 km/hr, and the other half at 1000 km/hr. The French Concorde spends half it's TIME at 2500 km/hr, and the other half at 1000 km/ hr. Which one arrived at their destination first?


Homework Equations


d=vt


The Attempt at a Solution


I can do the calculations for the British Concorde, to find time, but I can't quite figure out how to do the calculations for the French Concorde. Please help? The only thing I can think of is this:
1/2t=40 000km/2500 km/hr for the first half of the time
Which is 16 hours, and then:
1/2t=40 000 km/1000 km/hr
Which is 40 hours

What I can't figure out, is whether to divide them both by 1/2 then add, or just add them together. Help?
 
Physics news on Phys.org
Hi TNewC,

Well I think actually you have approached the way of solving for the French Concorde slightly wrong. So let's think through the step by step, the combined distance traveled by the French Concorde (FC) at both speeds equals 40,000 km, which is what you didn't do in your attempt, you can't consider the distances traveled at different speeds separately.

So let us say that the distance traveled at 2500 km/hr is D1 and the distance traveled at 1000 km/hr is D2. So we have:

<br /> 40000 = D_1 + D_2<br />

But can express D1 and D2 in another way as shown by the equation you put:

<br /> 40000 = 2500\left(\frac{t_t}{2}\right) + 1000\left(\frac{t_t}{2}\right)<br />

There hopefully you can see I have replaced D1 and D2 with vt, where v is their respective speeds and t = tt/2 because they spend half the total time at these speeds. Note that I have written tt, meaning total time, instead of just t, to distinguish between the variable t in the equation d = vt and the time for this problem.

Now ill leave you there, hopefully you can see now it simply boils down to solving this simple equation for t :D, have fun TNewC
 
Thank you so much Galadirith! I really appreciate your answer, and you've managed to explain it all quite clearly. I actually understand it now :D
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Correct statement about a reservoir with outlet pipe'
The answer to this question is statements (ii) and (iv) are correct. (i) This is FALSE because the speed of water in the tap is greater than speed at the water surface (ii) I don't even understand this statement. What does the "seal" part have to do with water flowing out? Won't the water still flow out through the tap until the tank is empty whether the reservoir is sealed or not? (iii) In my opinion, this statement would be correct. Increasing the gravitational potential energy of the...
Back
Top