Calculating Power Use on a Hill with Air Resistance and Friction

  • Thread starter Thread starter Simonpe
  • Start date Start date
  • Tags Tags
    Strange
AI Thread Summary
The discussion revolves around calculating the power required for a person to ascend an 8-degree hill at a speed of 12 km/h, with a total mass of 75 kg and considering air resistance and friction at 5% of mg. The initial calculation yielded an incorrect power output of 120W, while the expected answer is 0.46kW. Participants suggest using the "force" method for the calculation, emphasizing that both energy and force methods should yield the same result. The original poster expresses anxiety about the problem but feels reassured after receiving guidance. The conversation highlights the importance of method selection in physics problems.
Simonpe
Messages
3
Reaction score
0
Hi!

I have a big problem with this simple question. I can manage all the other questions on the paper i got except this one, and it's even one of the easier in there. So please gimme suggestions of what formulas to use:

A person is struggeling his way up a 8 degree hill with the velocity of 12km/h. Calculate the power use. The total mass of him and his bicycle is 75kg. Air resistance and friction is 5,0% of mg.

I tried calculating it with both force laws and energy laws and i end up with the answer 120W (or something i can't remember) but the correct answer should be 0,46kW

Please excuse my bad english, and thanks for the help!

Simon
 
Physics news on Phys.org
Welcome to PF!

Show us how you got your answer and we'll give you a hand.
 
Thanks!

Unfortunately I've erased the first soultion and I've only got a lot of unreadable panic notes left :P but can u at least tell me what path to use, Energy or Force? Then i think i'll be able to solve it.

Thanks in advance!
 
Both methods should agree. Go ahead and use the "force" method. :smile:
 
I think i'll manage it now, after hours of studying. Got a test tomorrow morning and i got a little scared that i couldn't accomplish a simple task like that. Btw i used the energy method but thanks for the advice :D

take care and good night
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top