Air Resistance of a Diver using Ek and Eg

AI Thread Summary
The discussion focuses on calculating the average force of air resistance acting on a diver who weighs 57.0 kg and dives from a height of 15.0 m, reaching a speed of 14.0 m/s before entering the water. The kinetic energy (Ek) of the diver is calculated to be 5586 J, leading to an average air resistance force of approximately 372.4 N. The net force acting on the diver is determined to be 558.6 N, indicating that the diver experiences a force of friction (Ff) of 186.2 N due to air resistance. The diver's actual velocity before entering the water is less than expected in a vacuum, suggesting that air resistance reduces acceleration below gravitational acceleration (9.8 m/s²). The discussion also touches on using conservation of energy (COE) versus the sum of forces to solve the problem, highlighting different approaches to account for buoyant forces underwater.
physicsmyfav
Messages
2
Reaction score
0

Homework Statement


A 57.0 kg diver dives from a height of 15.0 m. She reaches a speed of 14.0 m/s just before entering the water. What was the average force of air resistance (e.g., friction) acting on the diver?
What is the force of friction underwater if she reaches a depth of 2.5 m before stopping? Do not neglect the buoyant force of 500 N acting on the diver once underwater

Homework Equations


Eg=mgh
Ek=(1/2)mv^2
Et=Ek+Eg
W=Ef-Ei
W=change in Ek
W=fd

The Attempt at a Solution


Ek=(1/2)(57kg)(14m/s)^2
=5586J

W=Ek
=5586J-0J

W=fd
5586J=F(15m)
5586/15=F
F=372.4N

Fnet=ma
=(57kg)(9.8N/kg)
=558.6N

Fnet=558.6N
Fapp-Ff=558.6N
372.4N-Ff=558.6N
Ff=186.2N

I'm not sure if I solved for friction properly. The way that I solved here doesn't work for the next step in the water, so I think initially started wrong.
 
Physics news on Phys.org
How does the actual velocity of the diver about to enter the water compare to what would be expected in a vacuum? What would that imply about the actual acceleration?
 
The only acceleration would be that of gravity 9.8.
 
physicsmyfav said:
The only acceleration would be that of gravity 9.8.

What I am trying to say is that the velocity of the diver ( as given in the problem) is somewhat less than what would result from g when falling from the height (as given in the problem). Clearly the diver is accelerating less than g and that is due to the force of air resistance. You can use Newton's Second law to determine what this force is.
 
It just occurred to me that the problem or the instructor wants the problem solved by COE. In this case, unless I made a math mistake, I get an answer close to yours. I took the sum of forces approach because it was a more straightforward way of addressing the buoyant force once the diver enters the water.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top