Electronics Building an Alarm Clock with Basic C Programming Skills

AI Thread Summary
To build a reliable alarm clock with minimal electronics knowledge and basic C programming skills, starting with a pre-assembled alarm clock kit is advisable. These kits provide essential components and guidance on assembly, helping to develop skills in electronics and soldering. For power supply, using a simple wall transformer to convert AC mains to the required DC voltage (5V or 3.3V) is recommended. The design's mechanical aspects are crucial for reliability, as alarm clocks often endure rough handling. Exploring projects using a Raspberry Pi can also offer insights into creating a custom alarm clock. Caution is advised when presenting the finished product in educational settings to avoid misunderstandings.
pioneerboy
Messages
30
Reaction score
1
I'd like to build my own reliable alarm clock, but I don't have any knowledge in electronics and no fancy equipment, only some humble C programming experience. What do I need and what do I need to know to build one myself.
Thanks very much.
 
Physics news on Phys.org
pioneerboy said:
I'd like to build my own reliable alarm clock, but I don't have any knowledge in electronics and no fancy equipment, only some humble C programming experience. What do I need and what do I need to know to build one myself.
Thanks very much.
What have you found so far with your Google searching? One of my first electronics projects was to take a basic alarm clock module and build the power supply and enclosure to make it into a real clock. I used that clock for a couple of decades before it wore out :smile:

But I had the background and experience by then to build the power supply (AC Mains in, 5Vdc out), including all the things you have to do to be able to get it UL approved for safety. That's not where you are right now, so at the very least, you would use a simple "wall transformer" type of power supply to get the 5Vdc or 3.3Vdc needed to power your clock circuit.

It might be best for you to just put together an alarm clock kit at this point, to start to learn about electronics assembly, soldering, etc., and the kits usually come with helpful information about the circuits you are putting together. Maybe do a search for Electronic Alarm Clock Kit, and show us what you find. :smile:
 
  • Like
Likes billy_joule
pioneerboy said:
I'd like to build my own reliable alarm clock, but I don't have any knowledge in electronics and no fancy equipment, only some humble C programming experience. What do I need and what do I need to know to build one myself.
Thanks very much.

Reliable is the most interesting word in your question. Sleepy people often abuse their alarm clocks. The mechanical part of the design will probably affect reliability more than electrical design.

You could learn a lot about engineering by thinking carefully about what you mean by reliable alarm clock, and then how to achieve it.
 
Perhaps see what people have built using a raspberry pi.
 
Please don't take your completed alarm clock to school and show it to a teacher. He may think it is a bomb and call the police. :wink:
 
skeptic2 said:
Please don't take your completed alarm clock to school and show it to a teacher. He may think it is a bomb and call the police. :wink:
LOL. Just get permission in writing first... o0)
 
Philips Hue was the very first provider of smart LED bulbs that can be controlled wirelessly. Over the years, as Philips sold ever improved models of smartbulbs, it became very difficult to identify exactly which model one of their bulbs is. Once I've installed a smart bulb, there is some additional information in the Hue app about the bulb model, but even then, I found that it requires information from both the app and from what's printed on the outside of bulb to be sure what the actual...
Some time ago I posted this Raspberry PI DIY Mass Spec using Raman Scattering. It's was something of a cumbersome project though, needing a 3D printer and special heat-resistant plastic giving of carcinogenic fumes during printing. To be blunt it was also not very mobile and interpreting the results was further cumbersome Recently though, I've been told that Arduino, and it's various sensor packages, has matured to the point where it's a usable alternative. Now I realize that a cigarette...

Similar threads

Replies
2
Views
3K
Replies
28
Views
5K
Replies
13
Views
3K
Replies
5
Views
3K
Replies
3
Views
7K
Replies
11
Views
3K
Replies
2
Views
2K
Replies
2
Views
847
Replies
7
Views
3K

Hot Threads

Back
Top