Angular Velocity of a Car going around a curve

AI Thread Summary
The discussion centers on calculating the angular velocity of a car making a 90-degree turn in 5 seconds. Initially, it was suggested that the angular velocity is π/2 radians per second, but this was corrected to π/10 radians per second. The participants clarified that while the direction of the velocity vector changes, the speed remains constant. The importance of including units in calculations was also emphasized. The final consensus is that the correct angular velocity for the scenario is π/10 radians per second.
RobGoodall
Messages
4
Reaction score
2
Homework Statement
A car taking going through a curve of radius 60.0 meters that turns the car through a horizontal ground angle of 90 degrees, if the car goes through the 90 degree curve in a time of 5 seconds, what is the car's Angular Velocity around the curve in radians per second?
Relevant Equations
ω=dθ/dt
θ=90°= π /2 so the instantaneous angular velocity dθ/dt= lim t -> 0 (θ(t + t)-θ(t))/( t)

When I calculate it out it is π /2 radians per second. Is this correct?
 
Physics news on Phys.org
Hi, and :welcome: !

When a 90 degrees turn is done in 5 seconds the ##\omega## can not be ##\pi/2## per second.

How many degrees per second is that ?
 
BvU said:
Hi, and :welcome: !

When a 90 degrees turn is done in 5 seconds the ##\omega## can not be ##\pi/2## per second.

How many degrees per second is that ?
90, that's why I'm confused.
 
So how many radians per second if ##\pi/2## radians take 5 seconds (and you may asssume constant speed) ?
 
The car is going around a curve so I assumed a constant change in velocity, or would it be constant?
If constant π /10
 
Direction of the velocity vector changes, but its magnitude (what the speedometer indicates) is constant.
 
BvU said:
Direction of the velocity vector changes, but its magnitude (what the speedometer indicates) is constant.
Thank you!
 
  • Like
Likes berkeman
You're welcome !
 
So what is your conclusion ?
 
  • #10
Ah, I missed the ##\pi/10## radians/s in post #5. Well done.

(Don't forget the units !)
 
Back
Top