Atmospheric pressure and the spring constant

AI Thread Summary
The discussion revolves around a physics homework problem involving a cylinder with a piston and a spring, where atmospheric pressure compresses the spring. The user successfully calculated the spring compression as 0.0214 m but struggled with the work done by atmospheric pressure, initially calculating it as 1.969 J, which was marked incorrect. Other participants noted that the work done by the atmosphere should account for kinetic energy and the dynamics of the system, suggesting that the effective work stored in the spring would be about 1 J, while the total work done by the atmosphere could be around 2 J. The conversation highlights the importance of considering real-world factors, such as the mass of the piston, which affects the calculations. Ultimately, the discussion emphasizes the complexity of the problem and the potential for errors in assumptions.
rasputin66
Messages
12
Reaction score
0

Homework Statement


I already found A, but I keep getting wrong answers for B.

A cylinder is fitted with a piston, beneath which is a spring, as in the drawing. The cylinder is open to the air at the top. Friction is absent. The spring constant of the spring is 4300 N/m. The piston has a negligible mass and a radius of 0.017 m. (a) When the air beneath the piston is completely pumped out, how much does the atmospheric pressure cause the spring to compress? (b) How much work does the atmospheric pressure do in compressing the spring?

k= 4300 N/m
r= 0.017 m
A= 0.00091 m^2
P= 101 kN/m
F= 91.995 N

Homework Equations


P= F/A
W= F d

The Attempt at a Solution



I found the answer to A which is 0.0214 m. So then I tried to use the Work equation and got 1.969 J. But this is wrong. I'm stuck! Please help!
 
Physics news on Phys.org
Please post your working.
 
OK, well the spring moved 0.0214 m and the F involved is 91.995 N.
W = F d
W = (91.995 N) (0.0214 m)= 1.968693 J
The homework program on the computer is telling me this is wrong. I don't know why. Do you think this is OK? Sometimes the program is mistaken.
 
That all seems correct, though my numbers are slightly different: .02133m and 1.956J.
But I wonder if the problem setter has made a mistake here. If you calculate the work done on the spring, kx2/2, you will only get half as much.
Imagine all the air being drawn out very quickly. At first, the force from the atmospheric pressure will be much more than the compressive force in the spring. Since all masses are taken to be zero, this will result in infinite acceleration! When that sort of thing happens to equations you have to relax your assumptions to reintroduce some sanity. In this case, allow the piston to have some small mass.
Now the piston will acquire KE and momentum. At the point where the spring has reached the equilibrium compression you calculated, 0.0213m, half of the work done by the atmosphere is in the form of KE of the piston. Note that this is true no matter how light we make the piston. In a real environment, the spring will then oscillate, losing energy to friction, asymptotically converging to the 0.0213 displacement.
In short, the work the atmosphere does will be about 2J, but the work then stored in the spring will be only about 1J.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top