How Strong is the Magnetic Field of a Bar Magnet at a Distance?

  • Thread starter Thread starter cse63146
  • Start date Start date
  • Tags Tags
    Magnet Torque
AI Thread Summary
The discussion revolves around calculating the strength of a bar magnet's magnetic field at a distance of 20 cm from its center, given a torque of 0.075 Nm in a 0.50 T external magnetic field. The initial calculation yielded an incorrect magnetic field strength of 37.5 T, which was deemed unrealistic. Upon reevaluation, it was determined that the correct strength should be 3.75 x 10^-6 T after accounting for a multiplication error with the constant factor. The importance of careful unit management and recalculating values in physics problems is emphasized. Accurate calculations are crucial for realistic results in magnetism.
cse63146
Messages
435
Reaction score
0

Homework Statement



A bar magnet experiences a torque of magnitude 0.075 Nm when it is perpendicular to a 0.50 T external magnetic field. What is the strength of the bar magnet's on-axis magnetic field at a point 20 cm from the center of the magnet?

Homework Equations



\tau = \vec{\mu} B sin\vartheta

B = \frac{\mu_0}{4 \pi} \frac{2 \vec{\mu}}{z^3}

The Attempt at a Solution



since its perpendicular, sin90 = 1 so:

\tau = \vec{\mu} B \Rightarrow \vec{\mu} = \frac{\tau}{B} = \frac{0.075}{0.5} = 0.15

B = \frac{\mu_0}{4 \pi} \frac{2 \vec{\mu}}{z^3} = 10^-7 \frac{2(0.15)}{0.2^3} = 37.5 T

Any help would be appreciated. Thank You.
 
Physics news on Phys.org
i don't get it.. what is ur problem as such? as far as i see it, you have already solved it...
 
I inputted 37.5 and it was wrong.
 
Last edited:
Considering that 37.5 T is 750,000 times greater than that on the surface of the earth, you might want to recalculate that value.
 
I see what I did wrong. I forgot to multiply it by 10^-7 so the answer should be 3.75 x 10^-6, and it is.
 
Last edited:
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top