Basic Question Regarding the Combined Gas Law/Equation

  • Thread starter Thread starter Denyven
  • Start date Start date
  • Tags Tags
    Gas
AI Thread Summary
In the discussion about the combined gas law, it is clarified that temperatures T1 and T2 must be expressed in absolute temperature scales for the equation to work correctly. While Kelvin is the preferred unit due to its direct relationship with the absolute zero point, other scales like Fahrenheit or Celsius can be used if they are adjusted accordingly. For Fahrenheit, an adjustment to a zero point that represents absolute zero is necessary. The conversation emphasizes that using Kelvin simplifies calculations and ensures accuracy in gas law applications.
Denyven
Messages
19
Reaction score
0
Hello All,
I was wondering, in the combined gass law \frac{p_{1}V_{1}}{T_{1}}=\frac{p_{2}V_{2}}{T_{2}} Does T_{1} and T_{2} have to be in kelvins, or can they be any other unit of temperature as long as a consistency of units is used?

Thanks
 
Chemistry news on Phys.org
Hello Denyven! :smile:

They could be in degrees Fahrenheit, provided it was adjusted to º F0, say, where absolute zero is at 0º Fo. :wink:

Without that adjustment, the equation just won't work. :redface:
 
Just to let you know, as Kelvin is the Celsius scale with the origin at zero, so Rankine is the Fahrenheit scale with the origin at zero.

However, the scale must be set up so that the absolute coldest temperature is zero.
 
You could represent it in, say, celcius. Then you would have \frac{pV}{T(K)}=\frac{pV}{T(^\circ C)-273.15}. You could do it similarily with Fahrenheit if you want, but for simple equations, use the kelvin scale.
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
Back
Top