Calculating Ball's Range on Incline 15 Degrees

AI Thread Summary
To calculate the range of a ball kicked up an incline at 15 degrees with an initial speed of 20 m/s and angle of 40 degrees, the initial angle must be adjusted to account for the incline. The range formula can be applied, but it may require modifying the calculations by incorporating the incline's angle, possibly using cosine. An alternative approach involves determining the slope of the incline and setting it equal to the trajectory equation to find the intersection point. It's suggested to redefine the coordinate system with the x-axis along the incline and the y-axis perpendicular to it for clarity. Ultimately, treating the problem as a standard projectile motion scenario simplifies the calculations.
P.O.L.A.R
Messages
22
Reaction score
0

Homework Statement


A ball is kicked with initial speed 20 m/s and initial angle 40 degrees up an incline of angle 15 degrees. Assume that the ball leaves the ground a the base of the incline at x_{0}=0 and y_{0}=0. How far up the incline does the ball initially land (not how far horizontally or vertically but how far along the incline)?


Homework Equations


Range: R=(v^{2}_{0}/g)sin2\Theta_{0}
y-y_{0}=(tan(\Theta_{0})(x-x_{0})-g(x-x_{0})^{2}/2(v_{0}cos\Theta_{0})^{2}

The Attempt at a Solution


Well what I tried was subtracting 15 from 40 and came up with 25 plugged it into the Range formula and went from got 31.3m. I think I am missing the the 15 degree incline and was wandering if I just multiplied the range by cos(15)?

I also thought that finding the slope of the 15 degree line then setting it equal to the trajectory formula I could find the point of intersection and do some trig from there. In order to do that I would have to find the slope of the line. I was wandering if [sin(15)/cos(15)]x would be the slope of the 15 degree incline?

Not sure which method works the first one seems like it could work but I was wondering if gravity changes when the angles are subtracted and if multipling by cos(15) is needed to make up for the incline?
 
Last edited:
Physics news on Phys.org
I recommend working the problem with the x-axis along the direction of the incline... the y-axis perpendicular to the incline... ie what is vx initial... what is vy initial... what is the acceleration in the x direction... what is the accleration in the y direction.

then it is just a straight projectile problem.
 
learningphysics said:
I recommend working the problem with the x-axis along the direction of the incline... the y-axis perpendicular to the incline... ie what is vx initial... what is vy initial... what is the acceleration in the x direction... what is the accleration in the y direction.

then it is just a straight projectile problem.

Ok that makes total sense thanks
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top