Calculating Equilibrium Angle for Charged Sphere on Silk Fiber

  • Thread starter Thread starter nateastle
  • Start date Start date
  • Tags Tags
    Force
AI Thread Summary
The discussion revolves around calculating the equilibrium angle of a charged sphere attached to a silk fiber near a charged insulating sheet. The sphere, weighing 0.4g and carrying a charge of 3 x 10^-10 C, experiences gravitational and electric forces, leading to a static force analysis. Participants break down the forces into x and y components, establishing equations for tension in the fiber and the forces acting on the sphere. The electric field generated by the sheet is calculated using its surface charge density, which is essential for determining the electric force on the sphere. Ultimately, the angle of equilibrium is found to be approximately 6.2 degrees after applying trigonometric functions to the calculated forces.
nateastle
Messages
15
Reaction score
0
a small .4g sphere carries a charge of 3 X 10^-10 and is attached to one end of a silk fiber 8cm long. The other end of the fiber is attached to a large vertical insulating sheet that has surface charge density equal to 25 X 10 -6 C/m^2. The sphere on the end of the fiber is repelled outward and finally reaches a state of equilibrium. Find the angle that the fiber makes with the vertical sheet.

Okay here is what I have done. I know I need to get the tan of theta. What I did is I calculated out the 2 forces. There is gravity which is Tcos(theta) = mg and there is the colomb force which is Tsin(Theta) which is qE. From there I am getting confused on what I should do next. Any help is much appreciated.
 
Physics news on Phys.org
Good start. You realize that this is a static force analysis problem.

Let's assume that the insulating sheet is on the right and the sphere is being repelled to the left. Breaking it down into x and y components:

x-axis:
- Electric force pushing to the left (Felectric)
- String tension pulling to the right (Fstring)

y-axis:
- Gravity pulling down (Fgrav)
- String tension pulling up (Fstring)

How many unknowns do we have and can we solve with the number of equations available? We know that we have two equations, one in x: Fnet_x = 0, and similiarly in y: Fnet_y = 0. There are two unknowns, the angle theta and the string tension T. You're on the right track ^^.

P.S. You'll also need to know that the electric field due to a large sheet charge is uniform everywhere and equal to E = \frac{\sigma}{2\epsilon_0} and of course, the Colomb force is then simply Fe = qE as you have mentioned.
 
nateastle said:
a small .4g sphere carries a charge of 3 X 10^-10 and is attached to one end of a silk fiber 8cm long. The other end of the fiber is attached to a large vertical insulating sheet that has surface charge density equal to 25 X 10 -6 C/m^2. The sphere on the end of the fiber is repelled outward and finally reaches a state of equilibrium. Find the angle that the fiber makes with the vertical sheet.

Okay here is what I have done. I know I need to get the tan of theta. What I did is I calculated out the 2 forces. There is gravity which is Tcos(theta) = mg and there is the colomb force which is Tsin(Theta) which is qE. From there I am getting confused on what I should do next. Any help is much appreciated.

T\cos\theta = mg

T\sin\theta = qE

tan\theta = \sin\theta/\cos\theta

Seems to me you have everything you need.

AM
 
okay so if I am correct I would take the atan of my answer and get about 6.2 degrees is this correct?
 
nateastle said:
okay so if I am correct I would take the atan of my answer and get about 6.2 degrees is this correct?
You will have to show us how you got E.

AM
 
I got E by \sigma = 25 * 10^-6 C/m^2 then I took that and divided by 2e0 with e0 being 8.85 *10^-12 I took that answer(1.4 * 10^6) and multiplied it by the charge of the ball which is 3 X 10^10 C which gave a force of 4.23 X 10^-4.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top