Calculating Friction Force for Moving a Crate Across a Rough Floor

  • Thread starter Thread starter jwang023
  • Start date Start date
  • Tags Tags
    Friction Homework
AI Thread Summary
To calculate the force needed to move a 32 kg crate across a rough floor with a coefficient of static friction of 0.56, a free body diagram is essential. The equations for the x and y directions must be set up correctly, considering the applied force at an angle of 21 degrees below the horizontal. It's important to use the coefficient of static friction (μs) instead of kinetic friction (μk) as the problem specifies static conditions. The net forces in both directions must be analyzed, leading to two unknowns: the force (F) and acceleration (a), which may require an assumption for solving. A careful reevaluation of the free body diagram and equations will help clarify the solution process.
jwang023
Messages
19
Reaction score
0

Homework Statement



to move a large crate across a rough floor you push it with a force of 21 degrees below the horizontal of F. find the necessary force to move the 32 kg crate with a coefficient of static friction of floor and crate is 0.56?

Homework Equations





The Attempt at a Solution

 
Physics news on Phys.org
please show your attempt to solve the question .. Then we will help ..
 
Well, I went ahead and made a picture representing what I needed and what not. I than set the x and y directions to try to make equations to solve for the variables.

So, in the x direction, I had -(mu sub k) + Fcos21= ma
For the y direction I set an equation -mg+N-Fsin21=0

I wrote fk =mu sub k*N on the side for reference. I was stuck because I figured I have to find force first right?
 
have you drawn a free body diagram carefully?

In the x-direction the friction force is not(mu sub k) this is not a force?, and another thing you are not given (mu sub k) you are given (mu sub s) don't you think you should use it?

I suggest you to do the free body diagram more carefully this time ..

You know that, Fx(net)=ma and Fy(net)= zero .. You are given the mass m=32kg and (mu sub s) substituting in the equations you will end up with 2 unknowns F (what the question wants) and a (the acceleration) , so do you have to make a certain assumption ? Try to think about it and let us know your answer :) ..
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Back
Top