Calculating pH, pOH, [OH-], and Kw at 37°C

  • Thread starter Thread starter spiff711
  • Start date Start date
  • Tags Tags
    Ph
AI Thread Summary
The pH of pure water at 37°C is 6.80, leading to a calculated pOH of 7.20 and an [OH-] concentration of 6.3 x 10^-8 M. However, the correct values at this temperature are a pOH of 6.8 and an [OH-] concentration of 1.6 x 10^-7 M, with Kw being 2.5 x 10^-14. The confusion arose from incorrectly using the standard Kw value of 1 x 10^-14, which applies at 25°C, rather than adjusting for the higher temperature. The relationship between [H+] and [OH-] is crucial, as they are equal in pure water due to autodissociation. Understanding these principles clarifies the calculations for pH, pOH, and Kw at 37°C.
spiff711
Messages
4
Reaction score
0
Problem:
The pH of pure water at 37°C is 6.80. Calculate Kw,
pOH, and [OH-] at this temperature.

Work:
pH: 6.8
pOH = 14 -6.8 = 7.2
[OH]: 10-7.2 = 6.3 x 10-8 M
Kw= [H3O] [OH] = 1.5 x 10-7 x 6.3 x 10-8 = 1x10-14


Real answer:
pH:6.8
pOH:6.8
[OH]: 1.6x10-7
Kw: 2.5 x 10-14

What am I doing wrong? Any help would be greatly appreciated.
 
Physics news on Phys.org
Beware my response here may be fundamentally flawed: but the question should give you both pH and pOH if you want to find Kw for water at 37 celslius.

In your "Work" section you bluntly assumed 1x10-14 for water, but this is NOT the value for water at 37 celsius.
 
Thanks for the response.

Well Kw= [H3O] x [OH]
So I got the value for pOH from the equation pk = 14 = pOH + pH.
I then found the concentrations for H3O and OH by using the formulas for pH (pH = -log [H3O]) and pOH ( pOH= -log[OH]). I then plugged those values into the orginal equation and got Kw = 1x10-14. I realize that is the value for water at 25o C but apart from the fact that K increases with temperature I don't know how else it ties in.
 
Where does the OH- comes from? Think about stoichiometry of the reaction. How is [OH-] related to [H+] if there are no other sources of both but water autodissociation?
 
Now this is clear (Borek, #4). The [H+] concentration is equal to the [OH-] concentration. All the values needed to determine the dissociation constant are present.
 
Edit- Never mind, I understand. The water dissociates into equal parts so the pH and pOH will both be 6.8. I think at least.

Thanks for the help!
 
Thread 'Confusion regarding a chemical kinetics problem'
TL;DR Summary: cannot find out error in solution proposed. [![question with rate laws][1]][1] Now the rate law for the reaction (i.e reaction rate) can be written as: $$ R= k[N_2O_5] $$ my main question is, WHAT is this reaction equal to? what I mean here is, whether $$k[N_2O_5]= -d[N_2O_5]/dt$$ or is it $$k[N_2O_5]= -1/2 \frac{d}{dt} [N_2O_5] $$ ? The latter seems to be more apt, as the reaction rate must be -1/2 (disappearance rate of N2O5), which adheres to the stoichiometry of the...
Back
Top