Calculating Pion Halflife: Gamma, Time Dilation, and Particle Decay

  • Thread starter Thread starter blue2004STi
  • Start date Start date
  • Tags Tags
    Pion
AI Thread Summary
The discussion focuses on calculating the half-life of pions traveling at 0.8c, addressing time dilation and particle decay. The gamma factor is calculated as 5/3, leading to an observed half-life of 3x10^-8 seconds in the lab frame. For the number of remaining pions after traveling 36m, the lab time of flight is determined to be 1.5x10^-7 seconds. The decay formula A = Ao e^(-t / t 1/2) is suggested for calculating the remaining pions, but clarity on the calculations is sought. The conversation emphasizes the importance of using the lab frame for accurate results.
blue2004STi
Messages
21
Reaction score
0
Problem:

A group of 'pi' mesons (pions) is observed traveling at speed 0.8c in a particle physics laboratory. (a) What is the factor 'gamma' for the pions? (b) If the pions' proper half-life is 1.8x10^-8 s, what is their half-life as observed in the lab frame? (c) If there were initially 32,000 pions, how many will be left after they've traveled 36m? (d) What would the answer be to (c) if one ignored time dialation?

Equations:

Time dialation- delta T = (delta T')*gamma
gamma = 1/(sqrt(1-(beta)^2))
beta = velocity/speed of light

Attempt at solution:

a) No problem here... Just plug 'n chug... 1/sqrt(1-(.8c/c)) = 5/3

b) No problem here... delta T = (1.8x10^-8)(5/3)
delta T = 3x10^-8s

c) Here's where it begins... I started by calculating how much time was used going 37m in the labs frame which is 1.5x10^-7s. Then I calculated how much time was used in the pions frame... 1.5x10^-7(5/3) = 9x10^-8s. That's where I have no clue what to do next... I can't find any examples in the book or using google or in my notes for my class. Any ideas on an equation or maybe just a simple calculation I'm missing?

d) I can't figure out (c) so I don't know how to answer this question with any accuracy.

Thanks,

Matt
 
Physics news on Phys.org
For part c, could you not solve the problem in the lab frame? In that frame:

Lab delta x = 36 m (I assuming this is a lab frame measurement)

Lab time of flight for 36 m = lab distance / lab speed = 36 m / 0.8 c

Lab half life = 3 (10^-8) seconds

A = Ao e^(-t / t 1/2) which is Ao e^(-5).
 
I think that's what (d) is asking though...

Thanks though
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top