What Happens to Potential Difference When Switches Are Closed?

22990atinesh
Messages
143
Reaction score
1

Homework Statement



Two capacitors ##C_1## and ##C_2## (where ##C_1 > C_2##) are charged to the same initial potential difference ##ΔV_i##, but with opposite polarity. The charged capacitors are removed from the battery, and their plates are connected as shown in Figure a. The switches ##S_1## and ##S_2## are then closed, as shown in Figure b. Find the final potential difference ##V_f## between a and b after the switches are closed

Capture.jpg


The Attempt at a Solution



I'm trying to understand, How polarity of charges changed for ##C_2## when switches ##S_1## and ##S_2## are closed. How left plate of ##C_2## acquires positive charge and right plate negative charge. In which direction electrons flows, from which plate to which plate. Please explain..
 
Physics news on Phys.org
22990atinesh said:
I'm trying to understand, How polarity of charges changed for ##C_2## when switches ##S_1## and ##S_2## are closed. How left plate of ##C_2## acquires positive charge and right plate negative charge. In which direction electrons flows, from which plate to which plate. Please explain..

The bottom right plate attracts electrons from top right plate .The electrons flow from top right plate to the bottom right plate which in turn repel electrons from bottom left plate to top left plate .
 
Vibhor said:
The bottom right plate attracts electrons from top right plate .The electrons flow from top right plate to the bottom right plate which in turn repel electrons from bottom left plate to top left plate .

I didn't understand :confused:
 
What Vibhor means is that the right plate of ## C_1## initially has a surplus of ##e^-##, and the right plate of ##C_2## is lacking in ##e^-##, if you look this up, the will talk about electron "holes" which causes the positive charge. Use the sea of electrons model of current to determine what happens.
 
Also, make sure to keep track of the Voltages of your system the whole time.
 
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
The value of H equals ## 10^{3}## in natural units, According to : https://en.wikipedia.org/wiki/Natural_units, ## t \sim 10^{-21} sec = 10^{21} Hz ##, and since ## \text{GeV} \sim 10^{24} \text{Hz } ##, ## GeV \sim 10^{24} \times 10^{-21} = 10^3 ## in natural units. So is this conversion correct? Also in the above formula, can I convert H to that natural units , since it’s a constant, while keeping k in Hz ?
Back
Top