Calculating Speed on an Inclined Plane | Mechanical Energy #2

AI Thread Summary
To calculate the speed of a 19 kg box sliding down a frictionless ramp, apply the conservation of mechanical energy principle. The potential energy (PE) at the top, calculated as PE = mgh, equals the kinetic energy (KE) at the bottom, expressed as KE = 1/2 mv^2. Setting these two equations equal allows for solving the speed at the bottom of the ramp. The final velocity can be determined using the formula v = √(2gh), where g is the acceleration due to gravity. Ensure the answer is provided with the correct units.
billyghost
Messages
5
Reaction score
0
A 19 kg box starts at rest and slides down a frictionless ramp. The length of the ramp is 4.5 m and the height above the ground at the top is 1.3 m. How fast is the box moving at the bottom of the ramp?

Unsure of inclined planes...help with formulas, etc.?
 
Physics news on Phys.org
Think conservation of mechanical energy (KE + PE). (Measure the potential energy from the bottom of the ramp.)

Mechanical Energy (at top of ramp) = Mechanical Energy (at bottom of ramp)
 
19 x 1.3 x 9.8 ?
 
billyghost said:
19 x 1.3 x 9.8 ?
That looks like a calculation of the PE at the top of the ramp: PE = mgh. (The units will be Joules.) Which happens to be the total mechanical energy, since it starts from rest. Since energy is conserved, this also equals the KE at the bottom of the ramp. ({KE} = 1/2 m v^2)

So set the PE at the top (mgh) equal to the KE at the bottom (1/2 m v^2) and solve for the speed.
 
Therefore,velocity should be the square root of 2 x 9.8 x 1.3
 
Right. But be sure to give your answer with the proper units.
 
Thread 'Struggling to make relation between elastic force and height'
Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top