Calculating Total Charge in an Ideal Circuit Element | Circuit Analysis Homework

[kaiser0792]

Homework Statement

The current at the terminals of the element in an ideal basic circuit element is
i = 0, t < 0;

i = 20e^(-5000t) A, t \leq 0

Calculate the total charge ( in microcoulombs) entering the element at its upper terminal.

Homework Equations

The Attempt at a Solution

I'm just starting a Circuit Analysis course next week and I'm looking ahead in the text, trying to hit the ground running. There are no sample problems that even give me a starting place??

 

[rock.freak667]

Current can be expressed at the rate of flow of charge, so that i =dQ/dt.

So you can integrate over time and get the total charge. Though why it time t < 0?

 

[kaiser0792]

I suppose that is just a way of saying that there was no current flowing before the reference time, t = 0.

 

[kaiser0792]

I tried integrating and came up with -0.04e^-5000t + C coulombs.

Answer is supposed to be 4000 microcoulombs. My integration is a little rusty. Help?

 

[rock.freak667]

I tried integrating and came up with -0.04e^-5000t + C coulombs.

Answer is supposed to be 4000 microcoulombs. My integration is a little rusty. Help?

The -0.04 should be 0.004, but remember your time is t≥0. So you are really integrating from 0 to ∞ so you need to compute

\left[ -0.004e^{-5000t} \right]_0 ^{\infty}

 

[kaiser0792]

Thanks for the help, I knew the Integral to be solved and the limits of integration, what I was missing was the negative exponent of e. You helped me, thank you.

 

[kaiser0792]

The -0.04 should be 0.004, but remember your time is t≥0. So you are really integrating from 0 to ∞ so you need to compute

\left[ -0.004e^{-5000t} \right]_0 ^{\infty}

Thanks rock.freak, I was overlooking the negative exponent of "e" when I was integrating.
You helped me, thanks. Sometimes you just need to bounce it off someone else.