Calculating Velocity of a Bullet Using Conservation of Energy and Momentum

  • Thread starter Thread starter KD
  • Start date Start date
  • Tags Tags
    Bullet Momentum
AI Thread Summary
A 7.45g bullet traveling at 353 m/s strikes a 0.725 kg block in a ballistic pendulum setup, causing the block to rise 12.1 cm. The initial calculation for the block's velocity was incorrectly derived as 2.41 m/s, which was actually the square of the velocity. By taking the square root of 2.41, the correct velocity of the block is found, which is then used in the momentum conservation equation. After correcting this, the final velocity of the bullet as it emerges from the block should be recalculated to match the expected answer of 203 m/s. Proper application of energy and momentum conservation principles is crucial for accurate results.
KD
Messages
27
Reaction score
0

Homework Statement



A 7.45g bullet has vi = 353 m/s. It strikes the 0.725 block of a ballistic pendulum and passes completely through the block. If the block rises through a distance h = 12.1 cm, what was the velocity of the bullet as it emerged from the block?


Homework Equations


Energy conservation and momentum

The Attempt at a Solution


First I solved for the velocity of the block when the bullet hit it. I used conservation of energy 1/2mv2 = mgh. I got the velocity as 2.41 m/s. Then I used conservation of momentum.
.00745(353)=.725(2.41) + .00745vf.
I solved for vf and got 118.5 m/s. The answer is supposed to be 203 m/s. I have tried combining the masses with the 2.41 velocity, but it still doesn't work out.
Can some one help me out? Thanks.
 
Physics news on Phys.org
KD said:

Homework Statement



A 7.45g bullet has vi = 353 m/s. It strikes the 0.725 block of a ballistic pendulum and passes completely through the block. If the block rises through a distance h = 12.1 cm, what was the velocity of the bullet as it emerged from the block?


Homework Equations


Energy conservation and momentum

The Attempt at a Solution


First I solved for the velocity of the block when the bullet hit it. I used conservation of energy 1/2mv2 = mgh. I got the velocity as 2.41 m/s. Then I used conservation of momentum.
.00745(353)=.725(2.41) + .00745vf.
I solved for vf and got 118.5 m/s. The answer is supposed to be 203 m/s. I have tried combining the masses with the 2.41 velocity, but it still doesn't work out.
Can some one help me out? Thanks.

The number in bold that you have calculated (2.41) is actually the square of the velocity (you forgot to take the square root) Take sqrt(2.41) and plug this into your momentum conservation equation, and you should get the correct answer.
 
Oh, good catch, thanks!
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top